VS-HFA04TB60S-M3 Vishay Semiconductors HEXFRED®, Ultrafast Soft Recovery Diode, 4 A
● DESCRIPTION:
■ VS-HFA04TB60S is a state of the art ultrafast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 V and 4 A continuous current, the VS-HFA04TB60S is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultrafast recovery time, the HEXFRED® product line features extremely low values of peak recovery current (I-RRM ) and does not exhibit any tendency to “snap-off” during the t b portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED VS-HFA04TB60S is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed.
● FEATURES:
■ Ultrafast recovery
■ Ultrasoft recovery
■ Very low I-RRM
■ Very low Q-rr
■ Specified at operating temperature
■ Meets MSL level 1, per J-STD-020, LF maximum peak of 245°C
■ BENEFITS
■ Reduced RFI and EMI
■ Reduced power loss in diode and switching transistor
■ Higher frequency operation
■ Reduced snubbing
■ Reduced parts count
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
TO-263AB |
|
English Chinese Chinese and English Japanese |
|
25-Oct-17 |
|
Revision: 25-Oct-17 |
|
96215 |
|
341 KB |
- +1 Like
- Add to Favorites
Recommend
- Firstohm‘s Superior Anti-Surge Wire Wound Axial Resistor SSWA Series With a low-temperature coefficient and a wide temperature range
- LEONI‘s B2ca Indoor Cable 84951605/84951604 is Suitable for The Very High Safety Requirements
- EPC Launches 2kW, 48 V/12 V DC-DC converter for More Efficient, Smaller, Faster, Bidirectional Converters for Mild-Hybrid Cars
- TT Electronics EBW5216 Busbar Shunt Resistors for High Current Measurements in The Hundreds of Amps Range
- How To Use An EPC Development Board to Evaluate The Performance of A Given GaN FET or IC in Common Applications?
- Stable Voltage Diode BZT52C16 - 16V Regulating Value, 500mW Power, SOD-123 Package
- How to Design a 2 kW 48 V/12 V Bi-Directional Power Module with packaged eGaN® FETs
- ALKAIDSEMI: Innovator in Power Devices and Smart Sensor Technology
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.