P4SMA Series TVS Diodes
2023-05-26
●Description
■Transient Voltage Suppressor (TVS) is a circuit protection component that either attenuates (reduces) or filters a transient voltage spike (overvoltage), TVS diodes provide critical protection by going into avalanche breakdown within no more than a few nanoseconds after a strike, clamping the transient voltage, and routing its current to the ground.
●Features
■Low incremental surge resistance
■Excellent clamping capability
■Low profile package with built-in strain relief
■Typical IR less than 1.0 μA above 12 V
■400 W peak pulse power capability with a 10/1000 μS Wave-form, repetition rate (duty cycle): 0.01%
■For surface mounted applications to optimize board space
■Typical failure mode is short from over-specified voltage or current
■IEC 61000-4-2 ESD 30 kV (Air), 30 kV (Contact)
■EFT protection of data lines in accordance with IEC 61000-4-4
■Very fast response time
■Glass passivated chip junction or Planar chip (< 10 V )
■High temperature to reflow soldering guaranteed: 260 °C/40sec
■VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%)
■Plastic package is flammability rated V-0 per Underwriters Laboratories
■Meet MSL level1, per J-STD-020
■Matte tin lead–free plated
■Halogen free and RoHS compliant
■Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD-609A.01)
■Transient Voltage Suppressor (TVS) is a circuit protection component that either attenuates (reduces) or filters a transient voltage spike (overvoltage), TVS diodes provide critical protection by going into avalanche breakdown within no more than a few nanoseconds after a strike, clamping the transient voltage, and routing its current to the ground.
●Features
■Low incremental surge resistance
■Excellent clamping capability
■Low profile package with built-in strain relief
■Typical IR less than 1.0 μA above 12 V
■400 W peak pulse power capability with a 10/1000 μS Wave-form, repetition rate (duty cycle): 0.01%
■For surface mounted applications to optimize board space
■Typical failure mode is short from over-specified voltage or current
■IEC 61000-4-2 ESD 30 kV (Air), 30 kV (Contact)
■EFT protection of data lines in accordance with IEC 61000-4-4
■Very fast response time
■Glass passivated chip junction or Planar chip (< 10 V )
■High temperature to reflow soldering guaranteed: 260 °C/40sec
■VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%)
■Plastic package is flammability rated V-0 per Underwriters Laboratories
■Meet MSL level1, per J-STD-020
■Matte tin lead–free plated
■Halogen free and RoHS compliant
■Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD-609A.01)
- +1 Like
- Add to Favorites
Recommend
More>
- Nippon Chemi-Con Developed PMA Series SMD-Type Conductive Polymer Aluminum Solid Capacitors with Low-Profile Package and Large Capacitance
- Nippon Chemi-Con Developed Conductive Polymer Aluminum Solid Capacitors PMA Series with 1.4 Times Higher Capacitance
- Nippon Chemi-Con Added PMA Series Resin-Molded Chip Type Conductive Polymer Aluminum Solid Capacitors With a Low Profile of 3.0mm
- Nippon Chemi-Con Expanded PSG Series and PMA Series Conductive Polymer Aluminum Solid Capacitors with 25V High-capacitance Products and 35V Products
- SUPU launched TPA series Push-in Terminal Block with the Feature of Safe and Fast Wiring and Flexible Installation
- Very Fast Acting Fuse PICO® II Fuse Series, Designed for Battery Management System | Littelfuse
- Littelfuse Launches ESR Series of Battery Protection Fuses,which safely interrupt faults to help prevent catastrophic failures and costly shutdowns
- How to Choose a Fuse for Safety?
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.