ATZB-X0-256-4-0-CN ZIGBIT 900MHZ WIRELESS MODULES DATASHEET

PublishTime：2022-09-16

●Features
■Compact size (38.5 x 20.0mm)
■High RX sensitivity (-103dBm)
■Outperforming link budget (up to +112dB)
■Up to +9.0dBm output power
■Very low power consumption:
▲8.7mA in RX mode (1)
▲34.8mA in TX mode (1)
▲0.6μA in sleep mode (2)
■Ample memory resources (256KB In-System, Self-Programmable Flash memory, 4KB EEPROM, 16KB SRAM)
■Wide range of interfaces (both analog and digital)
▲4-wire SPI, TWI
▲ISP, JTAG
▲Two analog comparator input
▲UART, USART
▲Timer, PWM
▲Four ADC lines
▲External Clock Input, Internal Clock Output
▲Up to 32 lines configurable as GPIO
■Preassigned Atmel® MAC address that can be used on end product
■Capability to use MAC address into the internal EEPROM
■IEEE® 802.15.4 compliant Transceiver
■900MHz ISM band
■Serial bootloader
■High Performance Low Power Atmel AVR® XMEGA® 8- and 32-bit Microcontroller
■Rapid design-in with built-in Chip Antenna
■RF Test point using MS-147 RF connector
■Small physical footprint and low profile for optimum fit in very small application boards
■Mesh networking capability
■Easy-to-use low cost development kit
■Single source of support for HW and SW
■Worldwide license-free operation
■Notes:
▲MCU is in active state with 3V Supply, CPU clock @ 16MHz, RX RPC enabled (for RX current), PHY_TX_PWR=0x0 (for TX current), All digital outputs pulled high.
▲Controller Sleep Mode: SLEEP_MODE_PWR_DOWN
●Summary
■ATZB-X0-256-4-0-CN ZigBit® is an ultra-compact and low-power 900MHz IEEE 802.15.4/ZigBee® OEM module from Atmel. Based on the innovative mixed-signal hardware platform from Atmel, this module uses the ATxmega256A3U [1] Microcontroller and AT86RF212B [5] 700/800/900MHz ISM band Transceiver. The radio transceiver provides high data rates from 20kb/s up to 1Mb/s, frame handling, outstanding receiver sensitivity and high transmit output power enabling a very robust wireless communication. The module is designed for wireless sensing, monitoring, control, data acquisition applications, to name a few. This ZigBit module eliminates the need for costly and time-consuming RF development, and shortens time-to -market for wireless applications.
■The module has an MS-147 RF connector that can be used as an RF test port. The built-in chip antenna is designed and tuned for the ZigBit design to enable quick integration of the ZigBit into any application.

Brand of Product：	Johanson Technology
Part#：	ATZB-X0-256-4-0-CN 、 ATZB-X0-256-4-0-CNR 、 AT86RF212B 、 ATxmega256A3U More Part#
Product Category：	900MHZ WIRELESS MODULES 、 900MHz IEEE 802.15.4/ZigBee® OEM module More
Application：	[ application boards ][ Building ][ Lighting controls ][ Wireless smoke ][ CO-detectors ][ HVAC ][ Inventory management ][ Environmental monitoring ][ Water metering ][ Industrial monitoring ][ Machinery ][ plant ][ Automated meter reading (AMR) ][ Security ] More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：
Language：	English Chinese Chinese and English Japanese
Date of Creation：	04/2014
Version Number：	Rev. 42268A
Data Encoding：
Data Size：	1.2 MB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 26 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

New Products & Solutions

More>

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits