ATZB-X0-256-3-0-C ZIGBIT 2.4GHZ WIRELESS MODULES DATASHEET
■Compact size (33.0 x 20.0mm)
■High RX sensitivity (- 96dBm)
■Outperforming link budget (up to 99.6dB)
■Up to +3.6dBm output power
■Very low power consumption:
▲6.3mA in RX mode(1)
▲20.5mA in TX mode(1)
▲0.3μA in sleep mode(2)
■Ample memory resources:
▲256KBytes in-system self-programmable Flash memory, 4KBytes EEPROM, 16KBytes SRAM
■Wide range of interfaces (both analog and digital):
▲4- wire SPI, TWI
▲ISP, JTAG
▲Two analog comparator input
▲UART, USART
▲Timer, PWM
▲Four ADC lines
▲External clock input, internal clock output
▲Up to 32 lines configurable as GPIO
■Preassigned Atmel® MAC address that can be used on end product
■Capability to use MAC address into the internal EEPROM
■IEEE® 802.15.4 compliant transceiver
■2.4GHz ISM band
■Serial bootloader
■High performance, low power AVR® XMEGA® 8 /16-bit Microcontroller
■Rapid design-in with built-in chip antenna
■RF test point using MS-147 RF connector
■Small physical footprint and low profile for optimum fit in very small application boards
■Mesh networking capability
■Easy-to-use low cost development kit
■Single source of support for HW and SW
■Worldwide license-free operation
■Notes:
▲MCU is in active state with 3V Supply, CPU clock @ 16MHz, RX RPC enabled (for RX current), PHY_TX_PWR=0x0 (for TX current), All digital outputs pulled high.
▲Controller Sleep Mode: SLEEP_MODE_PWR_DOWN.
●Summary
■ATZB-X0-256-3-0-C ZigBit® is an ultra-compact and low-power 2.4GHz IEEE 802.15.4/ZigBee® OEM module from Atmel. Based on the innovative mixed-signal hardware platform from Atmel, this module uses the ATxmega256A3U [1] Microcontroller and AT86RF233 [5] 2.4GHz ISM band transceiver. The radio transceiver provides high data rates from 250kb/s up to 2Mb/s, frame handling, outstanding receiver sensitivity and high transmit output power enabling a very robust wireless communication. The module is designed for wireless sensing, monitoring, control, data acquisition applications, to name a few. This ZigBit module eliminates the need for costly and time-consuming RF development, and shortens time-to-market for wireless applications.
■The module has an MS-147 RF connector that can be used as an RF test port. The built-in chip antenna is designed and tuned for the ZigBit design to enable quick integration of the ZigBit into any application.
ATZB-X0-256-3-0-C 、 ATxmega256A3U 、 ATZB-X0-256-3-0-CR 、 AT86RF233 |
|
2.4GHZ WIRELESS MODULES 、 2.4GHz IEEE 802.15.4/ZigBee® OEM module |
|
[ application boards ][ Building ][ Lighting controls ][ Wireless smoke- ][ CO-detectors ][ HVAC ][ Inventory management ][ Environmental monitoring ][ Water metering ][ Industrial monitoring ][ plant ][ Automated meter reading (AMR) ][ Security ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
11/2013 |
|
Rev. 42172A |
|
|
|
1.1 MB |
- +1 Like
- Add to Favorites
Recommend
- Nxp Licenses Advanced TMR Sensor Technology From Crocus Technology
- What is 5G Technology and Where Will 5G Technology be Applied
- Introduction to Through-hole Technology (THT) And Surface-mount Technology (SMT)
- KYOCERA‘s Ultra-Precise Plasma Processing Technology Wins Japan‘s 2021 Science and Technology Award
- Crocus Technology Acquired by Allegro MicroSystems to Accelerate Innovation in TMR Sensing Technology
- Based on Capacitive Coupling Technology, NOVOSENSE Capacitance Isolation Technology to Easily Solve Power Problems
- ROHM‘s Latest Technology Towards Achieving a Sustainable Society: Nano Energy™ Ultra-Low Current Consumption Technology
- The First Conference and Innovation Technology Forum of Hubei Province Vehicle Regulation Chip Industry Technology Innovation Consortium in 2023 was successfully held in Wuhan
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.