CDMA2000® 1xRTT Packet Data Testing with R&S® CMU200 Application Note
■This application note is intended as a guide to configuring the necessary Mobile IP or Simple IP network elements and R&S® CMU200 instrument for CDMA2000 1xRTT.
■Introduction
●The R&S® CMU200 packet data testing application provides a turnkey solution for the user to test end-to-end data applications using the CDMA2000 1xRTT service option 33. The R&S® CMU200 receives the data via an Ethernet interface, transforms the data into PPP packets and sends the packets to the mobile unit over the Radio Link Protocol. The R&S® CMU200 supports both Mobile IP and Simple IP data connections.
●All necessary functionality needed to perform end-to-end data testing is provided by the R&S® CMU200; no external equipment is required other than the server running the data application. The R&S® CMU200 performs the PPP link establishment, PPP Authentication (for Simple IP connections) and Mobile IP registration / authentication.
●The R&S® CMU200 unit also includes a FTP server and the PING application. These internal applications can be used to test end-to-end data transfers without connecting to an external data server.
|
|
Application note & Design Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2.2007 |
|
|
|
1CM51_4 |
|
1.3 MB |
- +1 Like
- Add to Favorites
Recommend
- A Linear Low Noise Amplifier MMIC ASL51T8, Suitable for Use in Both Receiver and Transmitter of Telecommunication Systems about 500~3000MHz
- Dual, 16-bit, 125MSPS ADC CBM16AD125, Features A Multistage, Differential Pipelined Architecture
- OFDM Introduction
- The Role of Cellular Routers
- MeiG Smart SLM750 4G Module Obtained TELEC&JATE Certification
- Deviser Debuts Combined Spectrum, Cable Analyzers with Fiber Test for Handheld Wireless Test and Measurement
- The Introduction of Global Navigation Satellite System-GNSS
- The Functions and Applications of M2M Modem
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.