A Linear Low Noise Amplifier MMIC ASL51T8, Suitable for Use in Both Receiver and Transmitter of Telecommunication Systems about 500~3000MHz
ASL51T8, a wideband Linear Low Noise Amplifier MMIC, has low noise and high linearity, being suitable for use in both receiver and transmitter of telecommunication systems about 500~3000MHz. The Linear Low Noise Amplifier MMIC is available in a TDFN8 package and passes through stringent DC, RF, and reliability tests.
Features
18dB Gain at 900MHz
21dBm P1dB at 900MHz
38dBm Output IP3 at 900MHz
0.37dB NF at 900MHz
Current adjustable with R2 (in the application circuit 3.1)
MTTF>100 Years
Single Supply: +3~+5V
Applications
Low Noise Amplifier for LTE, GSM, CDMA, GPS, PCS and WCDMA
Other Low Noise Application
Typical Performance
Supply voltage =+5V, TA=+25℃, ZO=50Ω
Absolute Maximum Ratings
Thermal Resistance
- +1 Like
- Add to Favorites
Recommend
- ASB ASL122 ——a Flat Gain LNA To Be Suitable To GNSS Receiver Application
- ASB Launches A New Wide Band Gain Block Amplifier with Single Circuit Matched over 50 ~ 7000 MHz
- Wide-band Gain Block Amplifier MMIC Suitable for Receiver and Transmitter of Telecommunication Systems
- Low Noise Amplifier with High Linearity, 20.5dbm P1db at 1.5 Ghz
- Ultra Flat Gain Low Noise Amplifier AHL5419T8 Has Gain Decreases from 20.3dB to 20.2dB at 0.05~3.5GHz (20.5dB at 2.0GHz)
- CATV Push-pull Amplifier MMIC ASL39D2 Provides a High Linearity and Low Noise over A Wide Range of Frequency up to 1800MHz
- Deltaww ASB 30x30x10mm D sleeve Fan Series – Purposefully Built to Fit Modern Space Constrictions in Electronic Designs
- CHA4220-98F, a Broadband 0.5-20GHz Distributed Driver Amplifier with 7dB Linear gain and 3.5dB Noise Figure
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.