MAAL-011182-DIE Distributed Low Noise Amplifier
■The MAAL-011182-DIE is a wideband distributed low noise amplifier with an operating frequency range of 2 to 20 GHz. This LNA has a 2.5 dB typical noise figure, 15 dB typical gain, and a 25 dBm typical output IP3. The output P1dB is 14 dBm typical with a 26 dBm typical P3dB. This LNA is biased with a single 5 V supply. The typical current draw is 65 mA.
■No external matching components are required. There are internal DC blocking capacitors at the input and output pins.
■The MAAL-011182-DIE is designed for wideband low noise applications such as test equipment. It is available as a bare die. This LNA is also available in a 5 mm, 32 lead PQFN package under part number MAAL-011182.
●Features
■15 dB Gain
■2.5 dB Noise Figure
■25 dBm Output IP3
■5 V Drain Supply
■Bare Die: 3044 x 1304 x 100 μm
■RoHS Compliant
Distributed Low Noise Amplifier 、 wideband distributed low noise amplifier |
|
[ ISM ][ Multi Market ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
Bare Die |
|
English Chinese Chinese and English Japanese |
|
2021/10/2 |
|
Rev. V1 |
|
DC-0024524 |
|
546 KB |
- +1 Like
- Add to Favorites
Recommend
- Low Noise Amplifier with High Linearity, 20.5dbm P1db at 1.5 Ghz
- 26-40GHz Wideband Low Noise Amplifier CHA2362-98F Suitable for Military to Commercial Communication Systems
- UMS CHA3024-QGG,a Broadband 2-22GHz Low Noise Amplifier with adjustable gain control
- A Linear Low Noise Amplifier MMIC ASL51T8, Suitable for Use in Both Receiver and Transmitter of Telecommunication Systems about 500~3000MHz
- Ultra Flat Gain Low Noise Amplifier AHL5419T8 Has Gain Decreases from 20.3dB to 20.2dB at 0.05~3.5GHz (20.5dB at 2.0GHz)
- CATV Push-pull Amplifier MMIC ASL39D2 Provides a High Linearity and Low Noise over A Wide Range of Frequency up to 1800MHz
- Nisshinbo starts producing the High-Speed Operational Amplifier NJM2725 with high-speed (160 MHz) and low noise (1.4 nV/√Hz)
- CHA2368-98F: New 50-71GHz wideband Low Noise Amplifier/Variable Gain Amplifier MMIC for multiple demanding applications
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.