Mach-NX Hardware Checklist Technical Note
●When designing complex hardware using the Mach-NX™ PLD, you must pay special attention to critical hardware configuration requirements. This technical note steps through these critical hardware requirements related to the Mach-NX devices. This document does not provide detailed step-by-step instructions but gives a high-level summary checklist to assist in the design process.
●The Mach-NX PLDs are low power, instant-on, Flash based devices with high integration and on-board System-on-Chip SoC Function Block (SFB) features. This technical note assumes that the reader is familiar with the Mach-NX device features as described in the Mach-NXFamily Data Sheet (FPGA-DS-02084).
●The critical hardware areas covered in this technical note include:
▲Power supplies as they relate to the Mach-NX supply rails and how to connect them to the PCB and the associated system.
▲Configuration and how to connect the configuration mode selection for proper power up configuration.
▲Device I/O interface and critical signals.
|
|
Application note & Design Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
February 2021 |
|
Revision 1.1 |
|
FPGA-TN-02235-1.1 |
|
803 KB |
- +1 Like
- Add to Favorites
Recommend
- Why GaN in Space?
- Innoscience Built The First World-class 8-inch Wafer FAB with Gold-free and CMOS Compatible Process
- Two kinds of structure of unit in SiC power MOSFET: plane structure and groove structure
- Successful Demonstration of Next-Gen Ka-band Rx Beamforming IC Portfolio with 1.5dB NF LNA
- Futureway Has Developed a Variety of Silicone Solutions for Battery Pack
- UnitedSiC Rediscovers The Perfect Switch with SiC FETs
- Low-Frequency Noise Modeling When Quantum Chips Are Getting Noiser
- What’s Fiber Array?
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.