P300 Smart 802.11ac 5GHz Outdoor Point-to-Point, Point-to-Multipoint Wireless Bridge
▲Designed for harsh outdoor conditions, the P300 is perfect for service providers looking to easily extend branded broadband services, backhaul small cell networks, offload data traffic from small cell networks, deploy multimedia hotspots, or offer wireless broadband services where fixed line access is limited.
▲The P300 is also ideal for hotels, schools, warehouses and other enterprises looking to extend managed wireless LANs (WLANs) across remote buildings and where Ethernet cabling is not possible.
▲Auto-pairing of wireless bridges, in addition to flexible mounting options, forgiving antenna pattern, and an easy-to-use aiming software, allows installers to deploy and optimize a wireless link in a short time, significantly increasing productivity and reducing deployment costs.
■Benefits
▲Wire-Like Throughput Over the Air
◆Based on the 802.11ac standard, the P300 supports RF data rates of up to 867 Mbps. With Ruckus’purpose-built directional antenna, the P300 supports throughputs up to 500 Mbps and offers performance up to 100 Mbps at 8 km (LoS).
▲Easy Installation and Pairing
◆Ruckus P300 enables installers to deploy wireless bridges effortlessly. Lightweight and designed with simple and flexible mounting options.
▲Simple Positioning and Aiming
◆Precision aiming and optimized performance with 30-degree beamwidth antenna and sophisticated LED-based aiming software. P300 proactively finds and selects the best performing channel automatically using Ruckus’ patented ChannelFly™ channel selection algorithms.
▲Secure and Scalable
◆The wireless bridge link is AES secure and can scale to support multiple networks segmented by VLANs.
▲10x Scalability with Wireless Multi-Node Bridging
◆Each root bridge is capable of supporting up to 10 receiving bridges.
▲Unmatched ROI
◆The wireless link offers much higher data throughput rates than T1/E1 or xDSL lines at only a fraction of the line installation cost and without the recurring leased line cost. The P300 is also an ideal option for backhauling small cell cellular networks.
▲Environmentally-Friendly Design
◆The internal dual polarized antenna not only does away the need for installing an external antenna, further simplifying the installation procedure, but also offers an aesthetically pleasing look and feel.
P300 、 901-P300-XX02 、 901-P300-XX01 、 902-0162-XXYY 、 902-0125-0000 、 911-2101-DP01 、 911-2401-DP01 、 911-1212-DP01 |
|
Wireless Bridge 、 Bridge 、 Outdoor Wireless Bridge 、 injector 、 mounting bracket 、 directional antenna |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2020 |
|
|
|
PA-114284-EN |
|
535 KB |
- +1 Like
- Add to Favorites
Recommend
- SMART CP3000 PCIe NVMe M.2 2280 SSDs Feature a PCIe Gen4 X4 Interface and are Compliant to NVMe 1.4 Specification
- -30V/-72A P-Channel Power MOSFET CMP3009TF5 for Battery management, Power management and Load switch
- Introduction to Several Common Antennas for Wireless Communications
- Introduction to Common Frequency Band of Satellite Communication (C / Ku / KA Band)
- Introducing Voice Command on An Embedded Device by Using A Commercially Available Kit
- Yint Electronics Offers 48V Common Protection Scheme Solutions for 5G Communication Power Supply
- Common Communication Method of Serial Port Server
- Recommend Commands for System Integration
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.