High-K Ceramic Substrates/Shims/Standoffs/Heat Sinks
■The intent for differentiating them was that our standard sizes would be called plates and the custom sizes would be called substrates. We decided to change our product line definitions to be less confusing. Plates and substrates are now interchangeable terms and will use our product code "H". These are larger (1"x1" or larger) and will consist of a variety of standard catalog sizes. If a custom size/metallization or other is needed, then a DLI drawing number will be used.
■Shims/Standoffs/Heatsinks will continue to use our product code "S". These are ALL custom parts and will therefore ALWAYS need a DLI drawing number in the part number as shown above. These will be smaller (less than 1" square) and will have a 2-digit width code that works the same way as our Di-Caps case size code. So a 15 mil wide part will have the code "15", and a part that is 100-199 mils wide uses the code "01".
|
|
Application note & Design Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2018/4/17 |
|
|
|
|
|
835 KB |
- +1 Like
- Add to Favorites
Recommend
- Knowles‘ Microstrip Filters Offer a High Repeatability and Temperature Stability from -55℃ to 125℃
- Knowles Introduced the MD Series, A Range of Medical-grade Capacitors for Implantable Designs
- Knowles Partners With Ole Wolff to Deliver Compact Hybrid Driver for TWS Earphones With HD Audio and ANC
- Knowles 3-Cell Supercapacitors Support Significant Jump in Energy Storage
- Knowles Microstrip Filter Helps Your Thin Film RF Devices to Achieve the Best Performance
- Knowles Releases New TWS Reference Design with Best-In-Class Music Experience and Advanced Features
- Knowles Provides a High-Precision and High-Reliability Machined and Plated Solutions for Passive Electronic Components
- Expanding Knowles‘ Filter Technology Offerings to Serve Low-Frequency Applications
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.