GS2100 SERIES, GS5200 SERIES GORE® EMI Gaskets
■ The test was performed by exposing material samples of GS2100 Series and GS5200 Series to gamma radiation from a Cobalt 60 source, (3 MeV). These samples were evaluated for tensile properties (See Table 1 and Figure 1 & 3) and changes in the “Force Displacement Resistance (FDR)” measuring DC resistance with compression (See Figure 2 & 4). Radiation exposure was performed under vacuum to remove oxygen and better simulate a spaceflight environment. The sample sets were divided into two groups: a control group with no exposure to radiation and a test group exposed to a total dose of 1.04 MRad, with a dose rate of 118 Rad/sec.
■ The samples in the test group for both GS2100 Series and GS5200 Series demonstrated a decrease in both tensile strength and elongation due to exposure to gamma radiation. Tensile testing was based on ASTM D638-08 Type V, gage length=1, rate=10 mm/min.
|
|
Supplier and Product Introduction |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2017 |
|
|
|
MAT-0323-REF-US-JUN17 |
|
187 KB |
- +1 Like
- Add to Favorites
Recommend
- Keysight Introduces High Density Source Measure Unit PZ2100 Series to Speed Semiconductor Characterization
- ASAIR Launches a New AMS2106 Intelligent Digital Gas Mass Flowmeter with High Sensitivity
- ASAIR‘s Latest AMS2106 Intelligent Digital Gas Mass Flow Meter with High Stability in the Full Range
- SMART‘s DuraFlash CS210 SATA M.2 2280 Solid State Drives with 3D NAND Technology
- SMART’s DuraFlash CS210 SATA 2.5” Solid State Drives are Designed for General-purpose Industrial Applications
- Runic‘s OP Amp RS622,Analog Switch RS2105 and Low-Consumption LDO RS3236 Apply in Finger Clip Oximeter
- Aeonsemi Unveils ChronoPHY™ Series of Multi-Rate 10G Ethernet PHYs Ethernet Transceivers, Integrating SyncE Jitter Filtering PLL Function
- OWON Has Demonstrated its XSA1000 Series, OWP-H, SPE Series, XDM Series in the 2023 Hong Kong Electronics Show
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.