Demonstration Board EPC9145 Quick Start Guide:1 kW, 3-phase BLDC Motor Drive Inverter using the EPC2206 eGaN® FET
The EPC9145 demonstration board is a 3-phase BLDC motor drive inverter board featuring the EPC2206 eGaN FET 2.2 mΩ maximum RDS(on), 80 V maximum device voltage, it can deliver up to 28 Apk (20 ARMS) maximum output current. The board can also be configured for multi-phase DC–DC conversion and the EPC2206 supports PWM switching frequencies up to 250kHz. The EPC9145 contains all the necessary critical functions circuits to support a complete motor drive inverter including gate drivers, regulated auxiliary power rails for housekeeping supplies, voltage, and temperature sense, accurate current sense, and protection functions. The various functional blocks are shown in figure 1. The EPC9145 mates with an assortment of compatible controllers, supported by various manufacturers leveraging existing resources for quick development purposes, that can quickly be configured as a motor drive inverter or DC–DC converter.
●MAIN FEATURES:
■3-phase inverter based on EPC2206 eGaN FET with wide input voltage ranging from 12 VIN to 60 V
■Dimensions: L x W = 130 mm x 100 mm (including connector)
■Low distortion switching that keep motor audio emission low and reduces torque ripple
■dv/dt optimized for motor drives less than 10 V/ns with option to increase dv/dt for DC–DC applications
■All current sense with high accuracy and bandwidth (option to choose between in- line and leg shunt current sensors)
■All phases voltage sense
■Voltage sense for the DC supply to the drive
■Housekeeping power for the various circuits and external controller derived from the main power supply to the EPC9145
■Temperature monitoring circuit
■Protection features including: over-current and input supply under voltage lockout
■Shaft encoder/Hall sensors interface connector for motor drive application with two voltage levels selection options
■The board can also be configured to operate as a synchronous buck DC–DC converter.
EPC9145 、 EPC2206 、 EPC9147A 、 EPC9147B 、 EPC9147C 、 EPC9147AE 、 EPC9528 |
|
Demonstration Board 、 eGaN® FET 、 3-phase BLDC motor drive inverter board |
|
[ Motor Drive Inverter ][ Multi-phase Synchronous Buck Converter ][ Full-Bridge Synchronous Buck Converter ][ 3-phase BLDC Motor Drive Inverter ] |
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2021 |
|
Reversion 1.2 |
|
|
|
2.4 MB |
- +1 Like
- Add to Favorites
Recommend
- EPC Introduces EPC9157 48V to 12V Demo Board Featuring EPC eGaN FETs and New Renesas DC-DC Controller
- EPC‘s New EPC9165 Bidirectional Converter that Delivers 2kW with 96.8% Peak Efficiency
- Design High-Performance Class-D Audio Amplifiers with EPC’s New Reference Design EPC9192 and eGaN FETs
- Sharge Selects GaN FETs EPC2218 from EPC for High-power USB PD Charger Retro 67 to Achieve the Most Efficient Power Conversion
- EPC Announces EPC9193 eGaN® FET Based 3-Phase BLDC Motor Drive Inverter for Low-Cost E-Bikes, Drones and Robotics
- EPC Launches a 3-phase BLDC Motor Drive Inverter EPC9173 with Embedded Gate Driver Function and a Floating Power GaN FET with 3.3mΩ RDS(on)
- Sekorm Became an Authorized Distributor of EPC(Efficient Power Conversion), Which Brings GaN FET Products
- EPC GaN FETs Enable 75 - 231Ampere Laser Diode Control in Nanoseconds for Advanced Automotive Autonomy
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.