Model CTP6000 Reference thermometer
●Temperature range: -196 ... +420 °C [-321 ... +788 °F]
●High stability
●Low drift, long service life
●Connecting leads, banana plugs, DIN connector or SMART connector
●Different lengths, therefore also suitable for fixed point calibration
■Description
▲The CTP6000 platinum resistance thermometer (PRT) has been designed both for precise temperature measurement in fixed laboratories and also for on-site use. It combines excellent technical characteristics with a robust design. If the 'off the shelf' range will not suit the needs the thermometers can be supplied custom manufactured to almost any specification.
▲The thermometer's connections range from open cable ends, through common DIN connectors, to intelligent SMART connectors. With a SMART connector, the sensor-specific coefficients can be stored directly in the probe's connector. Thus the SMART connector can easily be switched between instruments or channels. Any confusion of the coefficients is thus ruled out.
▲For calibration, the test items and the standard thermometer are brought to the same temperature in a temperature control unit.
▲As soon as a stable temperature is reached, the test items are read or their output signals are measured (resistance, thermoelectric voltage, standard signal) and compared with the standard thermometer.
▲The CTP6000, with a length of 500 mm [19.69 in], has been designed specifically for fixed-point calibration, which enables a calibration with the highest-possible accuracy.
|
[ testing, adjusting and calibrating temperature measuring instruments in factories and calibration laboratories ][ Comparative calibration in dry well calibrators, tube furnaces and liquid baths ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
07/2021 |
|
|
|
|
|
|
|
|
312 KB |
- +1 Like
- Add to Favorites
Recommend
- New Online Microwave Impedance Calculator Features Thermal Model Capabilities
- Keysight Announces New Device Modeling Software to Enable One-Stop Workflow
- Automotive-grade TVS diode UATxP series, P600 package, used for load dump protection of vehicle power supply system
- TE Model 41 Crash Test Accelerometer: Designed for Crush Zone Testing
- The Model EGAS-S398C NCAP Pedestrian Impact Test Sensor Available in Ranges from ±50g to ±2000g
- Nidec’s Driving Motor is Adopted for WHILL’s Foldable Mobility Product, “WHILL Model F”
- Wideband Gap Semiconductors: What Modeling Challenges Must We Overcome
- An Introduction to Semiconductor Device Modeling
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
