ADP7118 20 V, 200 mA, Low Noise,CMOS LDO Linear Regulator
2021-07-26
●GENERAL DESCRIPTION :
The ADP7118 is a CMOS, low dropout (LDO) linear regulator that operates from 2.7 V to 20 V and provides up to 200 mA of output current. This high input voltage LDO is ideal for the regulation of high performance analog and mixed-signal circuits operating from 20 V down to 1.2 V rails. Using an advanced proprietary architecture, the device provides high power supply rejection, low noise, and achieves excellent line and load transient response with a small 2.2 μF ceramic output capacitor. The ADP7118 regulator output noise is 11 μV rms independent of the output voltage for the fixed options of 5 V or less. The ADP7118 is available in 16 fixed output voltage options. The following voltages are available from stock: 1.2 V (adjustable), 1.8 V, 2.5 V, 3.3 V, 4.5 V, and 5.0 V.Additional voltages available by special order are 1.5 V, 1.85 V, 2.0 V, 2.2 V, 2.75 V, 2.8 V, 2.85 V, 3.8 V, 4.2 V, and 4.6 V. Each fixed output voltage can be adjusted above the initial set point with an external feedback divider. This allows the ADP7118to provide an output voltage from 1.2 V to VIN − VDO with high PSRR and low noise. User programmable soft start with an external capacitor is available in the LFCSP and SOIC packages. The ADP7118 is available in a 6-lead, 2 mm × 2 mm LFCSP making it not only a very compact solution, but it also provides excellent thermal performance for applications requiring up to 200 mA of output current in a small, low profile footprint. The ADP7118 is also available in a 5-lead TSOT and an 8-lead SOIC.
●FEATURES:
■Low noise: 11 μV rms independent of fixed output voltage
■PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, V-OUT ≤5V, V-in = 7V
■Input voltage range: 2.7 V to 20 V
■Maximum output current: 200 mA
■Initial accuracy: ±0.8%
■Accuracy over line, load, and temperature
▲-1.2% to +1.5%, T-j = -40°C to +85°C
▲±1 .8%, T-j = -40°C to +125°C
■Low dropout voltage: 200 mV (typical) at a 200 mA load, V-out = 5 V
■User programmable soft start (LFCSP and SOIC only)
■Low quiescent current, I-gnd = 50 μA (typical) with no load
■Low shutdown current: 1.8 pA at Vw = 5 V, 3.0 μA at V-iN = 20 V Stable with a small 2.2 μF ceramic output capacitor
■Fixed output voltage options: 1.8 V, 2.5 V, 3.3 V, 4.5 V, and 5.0 V 16 standard voltages between 1.2 V and 5.0 V are available
■Adjustable output from 1.2 V to V-in - V-do, output can be adjusted above initial set point
■Precision enable
■2 mm x 2 mm, 6-lead LFCSR 8-Lead SOIC, 5-Lead TSOT
■AEC-Q100 qualified for automotive applications
The ADP7118 is a CMOS, low dropout (LDO) linear regulator that operates from 2.7 V to 20 V and provides up to 200 mA of output current. This high input voltage LDO is ideal for the regulation of high performance analog and mixed-signal circuits operating from 20 V down to 1.2 V rails. Using an advanced proprietary architecture, the device provides high power supply rejection, low noise, and achieves excellent line and load transient response with a small 2.2 μF ceramic output capacitor. The ADP7118 regulator output noise is 11 μV rms independent of the output voltage for the fixed options of 5 V or less. The ADP7118 is available in 16 fixed output voltage options. The following voltages are available from stock: 1.2 V (adjustable), 1.8 V, 2.5 V, 3.3 V, 4.5 V, and 5.0 V.Additional voltages available by special order are 1.5 V, 1.85 V, 2.0 V, 2.2 V, 2.75 V, 2.8 V, 2.85 V, 3.8 V, 4.2 V, and 4.6 V. Each fixed output voltage can be adjusted above the initial set point with an external feedback divider. This allows the ADP7118to provide an output voltage from 1.2 V to VIN − VDO with high PSRR and low noise. User programmable soft start with an external capacitor is available in the LFCSP and SOIC packages. The ADP7118 is available in a 6-lead, 2 mm × 2 mm LFCSP making it not only a very compact solution, but it also provides excellent thermal performance for applications requiring up to 200 mA of output current in a small, low profile footprint. The ADP7118 is also available in a 5-lead TSOT and an 8-lead SOIC.
●FEATURES:
■Low noise: 11 μV rms independent of fixed output voltage
■PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, V-OUT ≤5V, V-in = 7V
■Input voltage range: 2.7 V to 20 V
■Maximum output current: 200 mA
■Initial accuracy: ±0.8%
■Accuracy over line, load, and temperature
▲-1.2% to +1.5%, T-j = -40°C to +85°C
▲±1 .8%, T-j = -40°C to +125°C
■Low dropout voltage: 200 mV (typical) at a 200 mA load, V-out = 5 V
■User programmable soft start (LFCSP and SOIC only)
■Low quiescent current, I-gnd = 50 μA (typical) with no load
■Low shutdown current: 1.8 pA at Vw = 5 V, 3.0 μA at V-iN = 20 V Stable with a small 2.2 μF ceramic output capacitor
■Fixed output voltage options: 1.8 V, 2.5 V, 3.3 V, 4.5 V, and 5.0 V 16 standard voltages between 1.2 V and 5.0 V are available
■Adjustable output from 1.2 V to V-in - V-do, output can be adjusted above initial set point
■Precision enable
■2 mm x 2 mm, 6-lead LFCSR 8-Lead SOIC, 5-Lead TSOT
■AEC-Q100 qualified for automotive applications
- +1 Like
- Add to Favorites
Recommend
More>
- EPC GaN FETs Deliver Benchmark Power Density and Efficiency for DC/DC Conversion
- Keysight Technologies and Analog Devices Demonstrate Latest O-RAN Technology at Mobile World Congress 2022
- Keysight Signs Memorandum of Understanding with Analog Devices to Advance 6G Technology Design and Development
- SMART Modular Announces the SMART Kestral PCIe Optane Memory Add-in-Card to Enable Memory Expansion and Acceleration
- Bluetooth® 5.3 – What‘s New for IoT Device Makers and Application Developers?
- Should DC-DC Or LDO Be Used?
- GaN Transistor for Several Power Applications
- Cmsemicon, Representing the New Power of China, Won the Domestic Power Device Industry Excellence Award
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
