ASL38G GPS Low Noise Two-Stage Amplifier with External Filter Connectable Data Sheet
especially for use in the RF front-end of GPS, GLONASS, Galileo, and COMPASS. It consists of two
amplifier stages (AMP1 and AMP2) which allow an external (off-chip) filter to be connected in between. It
has an active bias circuit for stable current over temperature and process variation. The amplifier is available in ten-lead TDFN10 package and passes through the stringent DC, RF, and reliability tests
Evaluation Board 、 GPS Low Noise Two-Stage Amplifier with External Filter Connectable |
|
[ use in the RF front-end of GPS, GLONASS, Galileo, and COMPASS ][ 300 ~ 3000 MHz low power consumption, high gain, and low noise application ][ GPS, GLONASS, Galileo, COMPASS Receivers ][ Automotive antenna ] |
|
Datasheet |
|
ESD(HBM,Class 0,200 V) 、 ESD(MM,Class A,50 V) 、 RoHS |
|
Please see the document for details |
|
|
|
|
|
TDFN 10 |
|
English Chinese Chinese and English Japanese |
|
January 2017 |
|
|
|
|
|
1.8 MB |
- +1 Like
- Add to Favorites
Recommend
- ASB ASL122 ——a Flat Gain LNA To Be Suitable To GNSS Receiver Application
- ASB Launches A New Wide Band Gain Block Amplifier with Single Circuit Matched over 50 ~ 7000 MHz
- CATV Push-pull Amplifier MMIC ASL39D2 Provides a High Linearity and Low Noise over A Wide Range of Frequency up to 1800MHz
- Wide-band Gain Block Amplifier MMIC Suitable for Receiver and Transmitter of Telecommunication Systems
- Low Noise Amplifier with High Linearity, 20.5dbm P1db at 1.5 Ghz
- Ultra Flat Gain Low Noise Amplifier AHL5419T8 Has Gain Decreases from 20.3dB to 20.2dB at 0.05~3.5GHz (20.5dB at 2.0GHz)
- A Linear Low Noise Amplifier MMIC ASL51T8, Suitable for Use in Both Receiver and Transmitter of Telecommunication Systems about 500~3000MHz
- Deltaww ASB 30x30x10mm D sleeve Fan Series – Purposefully Built to Fit Modern Space Constrictions in Electronic Designs
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.