ASL380 Wideband Linear Amplifier MMIC
●The ASL380, a wideband linear amplifier MMIC, has a high linearity and low noise over a wide range of frequency 5 MHz to 2.6 GHz, being suitable for use in the fiber receiver, distribution amplifiers and drop amplifiers of CATV systems, and in the mobile wireless repeaters and BTS. The amplifier is available in a SOT89 package and passes through the stringent DC, RF, and reliability tests.
■Features:
●19.2 dB Gain at 500 MHz
●22 dBm P1dB at 500 MHz
●41.5 dBm Output IP3 at 500 MHz
●1.6 dB NF at 500 MHz
●75Ω Input & Output Match
●Bandwidth 5 ~ 1200 MHz
●Single Supply +5 V
[ CATV ][ transformer ][ SMATV ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOT89 |
|
English Chinese Chinese and English Japanese |
|
November 2019 |
|
|
|
|
|
1.9 MB |
- +1 Like
- Add to Favorites
Recommend
- ASB ASL122 ——a Flat Gain LNA To Be Suitable To GNSS Receiver Application
- ASB Launches A New Wide Band Gain Block Amplifier with Single Circuit Matched over 50 ~ 7000 MHz
- CATV Push-pull Amplifier MMIC ASL39D2 Provides a High Linearity and Low Noise over A Wide Range of Frequency up to 1800MHz
- Wide-band Gain Block Amplifier MMIC Suitable for Receiver and Transmitter of Telecommunication Systems
- Low Noise Amplifier with High Linearity, 20.5dbm P1db at 1.5 Ghz
- Ultra Flat Gain Low Noise Amplifier AHL5419T8 Has Gain Decreases from 20.3dB to 20.2dB at 0.05~3.5GHz (20.5dB at 2.0GHz)
- A Linear Low Noise Amplifier MMIC ASL51T8, Suitable for Use in Both Receiver and Transmitter of Telecommunication Systems about 500~3000MHz
- Deltaww ASB 30x30x10mm D sleeve Fan Series – Purposefully Built to Fit Modern Space Constrictions in Electronic Designs
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.