SKY19247-686LF: 0.8 to 2.7 GHz SP3T High-Power Antenna Tuning Switch in a QFN Package
●Description
■The SKY19247-686LF is a Quad Flat No-Lead (QFN) single-pole, triple-throw (SP3T) switch designed for antenna tuning applications that require very low RON and COFF. Switching is controlled by an integrated Mobile Industry Processor Interface (MIPI) controller.
■No external DC blocking capacitors are required as long as no DC voltage is applied on any RF path.
■The SKY19247-686LF is provided in a compact 10-pin, 1.5 x 1.1 x 0.5 mm maximum QFN that meets requirements for board-level assembly.
■A functional block diagram is shown in Figure 1.
●Features
■Broadband frequency range: 0.8 to 2.7 GHz
■Low ON-state resistance and OFF-state capacitance
■Asymmetric RF1 path with ultra-low RON: 0.4 Ω
■High-power and peak-voltage handling (+41.5 dBm/37 V typical)
■Small QFN (10-pin, 1.5 x 1.1 x 0.5 mm maximum) package (MSL1, 260 °C per JEDEC J-STD-020)
SP3T High-Power Antenna Tuning Switch 、 Quad Flat No-Lead (QFN) single-pole, triple-throw (SP3T) switch |
|
[ Antenna tuning ][ Impedance tuning ][ Band switching ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
February 12, 2016 |
|
|
|
203879A |
|
289 KB |
- +1 Like
- Add to Favorites
Recommend
- Silicon Labs and Skyworks reach agreement to sell infrastructure and automotive business
- R&D Center of Kangxi Communication Technologies (Shanghai) Co., Ltd Was Successfully Identified as Shanghai Enterprise Technology Center
- CHIPBETTER has become one of the 52 candidates with the most growth potential in China‘s IC Billboard, deeply cultivating 5G RF chip industry
- Considerations in Wi-Fi 6 AP Design
- [产品]采用DO-201AE封装的TVS二极管1.5KE6.8~1.5KE550CA,峰值脉冲功率为1500W
- Atex-ready Plug & Play Solution for Process Analytical Technology (PAT)
- GaN Transistor for Several Power Applications
- RF-STAR Modules Using Nrf52840 SOC Chips are Widely Used in Wearable Devices
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.