SKY19247-686LF: 0.8 to 2.7 GHz SP3T MIPI® Antenna Tuning Switch PRODUCT SUMMARY
■DESCRIPTION
●The SKY19247-686LF is a Quad Flat No-Lead (QFN) single-pole, triple-throw (SP3T) switch designed for antenna tuning applications that require very low R-ON and C-OFF. Switching is controlled by an integrated Mobile Industry Processor Interface (MIPI) controller.
●No external DC blocking capacitors are required as long as no DC voltage is applied on any RF path.
●The SKY19247-686LF is provided in a compact 10-pin, 1.5 × 1.1 × 0.45 mm typical QFN that meets requirements for board-level assembly.
●A functional block diagram is shown in Figure 1.
■Features
●Broadband frequency range: 0.1 to 2.7 GHz
●Vpeak: 39 V
●R-ON: 0.8 Ω
●C-OFF: 220 fF
●Asymmetric RF1 path with ultra-low R-ON: 0.4 Ω
●Control logic: MIPI v2.0
●Small QFN (10-pin, 1.5 × 1.1 × 0.45 mm typical) package (MSL1, 260 ℃ per JEDEC J-STD-020)
SP3T MIPI® Antenna Tuning Switch 、 Quad Flat No-Lead (QFN) single-pole, triple-throw (SP3T) switch 、 Antenna Tuning Switch |
|
[ Aperture tuning ][ Impedance tuning ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
QFN |
|
English Chinese Chinese and English Japanese |
|
July 16, 2018 |
|
|
|
203879B |
|
231 KB |
- +1 Like
- Add to Favorites
Recommend
- Silicon Labs and Skyworks reach agreement to sell infrastructure and automotive business
- R&D Center of Kangxi Communication Technologies (Shanghai) Co., Ltd Was Successfully Identified as Shanghai Enterprise Technology Center
- CHIPBETTER has become one of the 52 candidates with the most growth potential in China‘s IC Billboard, deeply cultivating 5G RF chip industry
- Considerations in Wi-Fi 6 AP Design
- Sunlord Three-line CMC Coil SDMM0906 Series for MIPI C-PHY v1.0
- NCM25-AC Camera Module Featuring MIPI A-PHY, an Ultra-high-speed Interface Standard for Next-generation Automotive Electronics
- New Entry-line RA Family RA2E2 MCU Group for DDR5 DIMM LED Control Application
- Nippon Chemi-Con Developed NCM-CES Series Connection Kit with Camera Modules for Microcomputers
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.