PHDMI2FR4 ESD protection for ultra high-speed interfaces
●The device is designed to protect high-speed video interfaces such as High-Definition Multimedia Interface (HDMI) and DisplayPort interfaces against ElectroStatic Discharge (ESD).
●The device includes four high-level ESD protection diode structures. They protect sensitive transmitters and receivers for ultra high-speed signal lines. The device is encapsulated in a leadless small DFN2510A-10 (SOT1176-1) plastic package.
●All signal lines are protected by a special diode configuration offering ultra low line capacitanceof only 0.29 pF. These diodes utilize a snap-back structure in order to provide protection todownstream components from ESD voltages up to ±15 kV contact exceeding IEC 61000-4-2,level 4.
●Features and benefits:
■System-level ESD protection for HDMI and DisplayPort
■Line capacitance of only 0.29 pF for each channel
■Outstanding system protection: extremely deep snap-back combined with dynamic resistance of only 0.27 Ω
■All signal lines with integrated rail-to-rail clamping diodes for downstream ESD protection of ±15 kV exceeding IEC 61000-4-2, level 4
■Matched 0.5 mm trace spacing
■Signal lines with ≤ 0.05 pF matching capacitance between signal pairs
■Design-friendly ‘pass-through’ signal routing
[ high-speed receiver ][ transmitter port protection ][ Smartphones ][ tablet computers ][ Mobile Internet Devices (MID) ][ portable devices ][ TVs ][ monitors ][ Blu-ray ][ DVD recorders ][ players ][ Notebooks ][ main board graphic cards ][ ports ][ Set-top boxes ][ game consoles ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
DFN2510A-10;SOT1176-1 |
|
English Chinese Chinese and English Japanese |
|
27 April 2018 |
|
v.1 |
|
PHDMI2FR4 v.1 |
|
1.3 MB |
- +1 Like
- Add to Favorites
Recommend
- CEO of Slkor and Kinghelm Sang Shiqiang‘s Interpretation of the “Domestic Substitution“ of the Electronic Information Industry
- How to Prevent Electrostatic Discharge in EMC Circuit Design?
- YINT Offers the Array Of Electrostatic Discharge Devices that Prevent Electronic Equipment from Damaging by Fast Transient Voltages
- Electrostatic Discharge (ESD) Tips Every Engineer Should Know
- Bringing Power Supply Control ICs, TVS, ESD Electrostatic Protection Device and Other Products, TECHPUBLIC Announced a Distribution with Sekorm
- Yint Electronics Developed A Solution for the Characteristics of RS232 Transmission
- Applied Power Microelectronics and Sekorm Announced a Distribution Agreement that Brings ESD, Surge Protection Devices, Diodes and More
- TVS CSM12FB with Typical Capacitance of 7pF Only to Provide ESD Protection for Data, Control or Power Lines
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.