Smiths Interconnect‘s KA Series PCB connectors are capable of performing to significantly higher levels than the conservative ratings to date might suggest
Now, following rigorous testing at Smiths Interconnect’s Center of Excellence laboratory in KAnsas City, KS, we are able to confirm our products’ superior capabilities and proven suitability for a wide range of applications in harsh environments where failure is not an option – such as in the military, aerospace and commercial aviation markets.
Current Ratings
The KA Series contacts have a rating of 4 Amps each. While more than adequate for most applications, the new current carrying capability tests prove how conservative that rating was for individuals or groups of contacts, confirming that, for example:
· 1 KA contact can handle 9 Amps
· 2 adjacent contacts can take 6.5 Amps each
· Even a set of 4 adjacent contacts can each comfortably carry 5.4 Amps
All with less than a 30°C rise.
These 0.6mm contacts are able to handle the far greater current without detrimental temperature rises, so our customers can confidently incorporate all their processing needs in one connector for reductions in overall system footprint, cost and complexity.
Shock and Vibration
The KA Series has previously been tested to Military (MIL-DTL-55302) specifications, and now we have further tested them for shock and vibration to the even more rigorous European Space Agency (ESCC 3401) standards.
The results demonstrate that, even under the most extreme duress, our KA connectors are immune to failure due to high shock & vibration environments.
The Innovation Advantage
The impressive power-to-size ratio and ruggedness are made possible thanks to Smiths Interconnect’s patented Hypertac® hyperboloid contact design. Its unique ‘basket of wires’ configuration gives these connectors a smooth and self-wiping insertion/extraction path and ensures the contact area extends 360° around the pin and uniformly down its length. This maximizes and stabilizes the contact area, which significantly reduces the risk of interruption that can occur in standard cantilevered beam designs.
It also reduces resistance significantly over conventional contacts, allowing for more current to be carried through similar size contacts. This also results in a lower voltage drop across the connector, reducing the power consumption and associated heat generation within the system which could affect the integrity of the connector’s insulator and/or contacts on the PC board.
Furthermore, the low mass and resultant low inertia of the wires enable them to follow the most abrupt or extreme excursions of the pin without loss of contact, while the three-dimensional symmetry of the Hypertac contact design guarantees electrical continuity no matter how demanding the conditions.
This design is also what contains the insertion/extraction force to an average of 1oz per contact in tests, and increases our connectors’ mating cycle life rating by 10-fold that of competitive products. The widely recognized technological superiority and flexibility of the KA Series have long enabled it to provide a significant edge in military, aerospace and commercial aviation applications.
Now, with these enhanced ratings, we have demonstrated its suitability for even the most demanding of future operating environments where performance, safety and reliability are essential.
KA Series
High-reliability KA series MIL-DTL-55302 compliant connectors offer signal contacts designed for demanding defense, commercial aerospace and space applications. The 2 and 3-row series are equivalent to MIL-DTL-55302 and offer flexibility not available with other interconnects. The 4 and 5-row versions are also available with up to 490 contacts.
- +1 Like
- Add to Favorites
Recommend
- Smiths Interconnect‘s KA series connectors perform at significantly higher levels than those suggested by previous ratings
- Smiths Interconnect Acquires Reflex Photonics to Expand in High Speed Data Transmission Market
- How Smiths Interconnect Keeps The Medical World Connected
- Smiths Interconnect announces the launch of its Planar X Series of Thin Film Bandpass Filters for critical RF filtering in X, Ku, and Ka bands
- Smiths Interconnect Expands into Burn-In Test Market with Acquisition of Plastronics
- Smiths Interconnect Expanded RF Filter Capability for European and Asian Markets
- Smiths Interconnect’s cPCI launched on NASA Mars Perseverance Rover – Interconnect Product of the Year
- Smiths Interconnect NXS Series, New Ultra-High Density, Space Qualified Interconnect
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
