DL-RTA7139: Low Power FSK Two-way RF Transceiver Module with AMICCOM A7139 Chip

2020-09-26 DreamLNK
Low Power FSK Two-way RF Transceiver Module,DL-RTA7139,Low Power FSK Two-way RF Transceiver Module,wireless transceiver module

DL-RTA7139 was designed base on AMICCOM A7139 wireless transceiver chip from Taiwan. It is a compact and low power wireless transceiver module. AMICCOM A7139 is an ISM band wireless transceiver chip, mainly set to 315/433/470/868/915/MHz ISM/SRD frequency bands, with very low power consumption (e.g. under 434MHz band, power consumption in RX mode is just 3.8mA).


It is ideal for battery-powered long-distance wireless transmission, and provides a very good link budget, with high class E power output up to 20dBm, and a maximum transmission rate of 250Kbps. Users can easily develop wireless products with stable performance and high reliability by this module, without having a deep understanding of RF circuit design.


Features 

● Compact size, SMD stamp edge half-hole encapsulation;

● Operating frequency: 433.92 Mhz (other frequencies, 315M ~ 915MHz, can be customized);

● Transmission distance: open air around 1.2 km (indoor test: 10-layer stable transmission);

● Supports FSK, GFSK modulation and programmable control;

● The communication rate ranges from 2 Kbps to 250 Kbps, which is programmable;

● The maximum output power is 20dBm;

● High reception sensitivity: -119dBm@2kbps;

● Low power consumption, receiving current <4mA (AGC Off);

● Low power mode with power consumption <0.3uA, ideal for battery-powered wireless

transmission in long distance

● Independent 64BYTE transmit/receive data buffer

● Switching time between standby and receive state can be set (WOR function), to reduce the

power consumption

● Supports RSSI signal strength detection, and battery low-voltage detection

● Power supply: DC1.9~3.6V


Applications

● ISM band data communication 

● Intelligent Building

● Intelligent Home Security 

● AMR (Automatic Mobile Robot)

● Wireless remote control 

● Architectural Automation

● Wireless Sensor Network 

● Energy Control and Management


Technical Parameter

DC characteristics


Pins Definition


Size

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: