P-DUKE MCF Series Highly Integrated DC/DC Front-end Filters Accepting 9-36Vdc Input Voltage for Military and Rolling Stock Applications
P-DUKE has launched the new MCF series which are front-end filters for P-DUKE COTS (commercial-off-the-shelf) DC/DC converters to comply with the requirements of MIL-STD 1275D (Characteristic of 28-volt DC electrical systems in military vehicles) and MIL-STD 461 (Requirement for the control of electromagnetic interference characteristics of subsystems and equipment). This filter series accepts 9-36Vdc input voltage (50Vdc for 1 sec.) which is suitable for military vehicles with 28V bus systems respectively 24V bus systems They are also applicable for both heavy industrial and rolling stock applications.
The MCF series offers active input over-voltage protection which clamps over-voltages for a maximum of 50ms up to 100V to a safe level of 40V and absorbs +/-250V spikes with the internal protection circuits. By connecting the MCF module with a few additional MLCCs, its internal EMI filter meets MIL-STD 461G limits. Besides, it also features other active protection functions for advanced protection of the DC/DC converter module such as remote on/off control, overload protection, output short-circuit protection, reverse polarity protection, inrush current limitation, etc.
The MCF filter module is a fully integrated front-end module. In addition to complying with MIL-STD 1275D and MIL-STD 461G, it also fulfills the EN 50155, RIA 12, and NF F 01-510 standards for rolling stock 24V bus systems. It greatly reduces the time to design the EMI filter and peripheral circuits, saves system space, and provide comprehensive system protection.
The MCF filters meet the environmental MIL-STD 810F specification for shock and vibration. The operating temperature range of -40°C to 105°C (optionally -55℃) allows to use of these MCF filters with P-Duke DC/DC converters in a wide range of demanding applications.
The MCF modules are specially designed for military and rolling stock applications. Together with P-Duke COTS DC/DC converters, a significant cost saving is offered compared to using traditionally developed military DC/DC converters in the power range of up to 250W.
- 【Datasheet】MCF-028 Series MIL-COTS DC/DC Front-End Filters for Defense and Industrial Applications
- 【Datasheet】MCF-028 Series EMI filter and transient protector
- 【Datasheet】MCF-028015-001 EMI filter and transient protector
- 【Datasheet】MCF-028015-001 EMI filter and transient protector
- 【Datasheet】MCF-028015-001 EMI filter and transient protector
- 【Datasheet】MCF-028015-001 EMI filter and transient protector
- 【Datasheet】MCF-028005-001 EMI filter and transient protector
- 【Datasheet】MCF-028005-001 EMI filter and transient protector
- 【Datasheet】MCF-028005-001 EMI filter and transient protector
- 【Datasheet】MCF-028005-001 EMI filter and transient protector
- 【Datasheet】MCF-028015-001 EMI filter and transient protector
- 【Datasheet】MCF-028005-001 EMI filter and transient protector
- +1 Like
- Add to Favorites
Recommend
- P-DUKE Latest Safety Standards Update: Edition 3.2 IC/EN/UL60601-1 Declaration
- [Techno Frontier 2024 TOKYO] Visit P-DUKE !! East Hall No.3G-01
- P-DUKE Product EOL Announcement---DOS10-05T & DOH10-05T / DOS16-05T & DOH16-05T
- Visit P-DUKE at the CMEF 2024
- EOL Announcement--- P-DUKE LED15-xxS3P3 / LED15-xxS05
- P-DUKE launches the QAE and HAE ultra-wide input series DC-DC for supply interruption and change-over
- [Electronica 2024 Germany - München] VISIT P-DUKE!! Hall A4 No. 458
- Sep 24-27, 2024: Visit P-DUKE at InnoTrans Berlin – Hall 17, Booth 130
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.