The Application of FTDI IC Integrated Usb Products in Ai Control
Using USB in conjunction with AI (ArtifICial Intelligence) and industrial control systems is an emerging field that combines the flexibility and standardization of USB with the advanced capabilities of AI for industrial automation.
Here’s an overview of how USB can be integrated with AI and industrial control.
Data Acquisition and Sensor Integration
USB can be used to connect various sensors and data acquisition devices to industrial control systems. These sensors can collect data such as temperature, pressure, humidity and motion which can then be processed by AI algorithms to optimize industrial processes.
Example:
• USB Sensors
Temperature sensors, humidity sensors, motion detectors etc., connected via USB.
• AI Processing
AI algorithms analyze the sensor data to predict equipment failures, optimize energy usage or improve production quality.
Edge Computing Devices
USB can interface with edge computing devices that perform AI processing at the edge of the network, closer to the data source. This reduces latency and bandwidth usage, enabling real-time decision-making and control in industrial environments.
Example:
• Edge Devices
Small form-factor computers or AI modules (like NVIDIA Jetson Nano) connected via USB.
• AI Capabilities
Real-time image recognition, anomaly detection and predictive maintenance.
Human-Machine Interfaces (HMIs)
USB is commonly used to connect HMIs, such as touchscreens and control panels, to industrial control systems. AI can enhance HMIs by providing advanced features like voice recognition, gesture control and predictive suggestions to operators.
Example:
• HMI Devices
Touchscreens, tablets and other input devices connected via USB.
• AI Enhancements
Voice-activated commands, predictive text and smart alerts.
Programmable Logic Controllers (PLCs) and USB Modules
PLCs are widely used in industrial control systems. USB modules can be used to expand the capabilities of PLCs by adding AI processing units or connecting to external AI platforms.
Example:
• USB Modules for PLCs
USB interfaces for adding AI co-processors or connecting to cloud-based AI services.
• AI Applications
Improved control strategies, fault detection and process optimization.
Robotics and Automation
USB can be used to interface with robotic components, such as cameras, grippers and sensors, which are crucial for automation. AI algorithms can enhance robotic systems by enabling advanced capabilities like machine vision, autonomous navigation and adaptive control.
Example:
• Robotic Components
Cameras, LIDAR sensors and motor controllers connected via USB.
• AI Integration
Machine vision for quality inspection, path planning for autonomous robots and adaptive control for dynamic environments.
Integrating USB with AI and industrial control systems offers numerous benefits, including enhanced data acquisition, real-time processing, improved human-machine interaction and advanced robotics. This combination leverages the simplicity and ubiquity of USB with the transformative power of AI to create smarter, more efficient, and more responsive industrial environments.
The FT2232H is a USB 2.0 High Speed (480Mb/s) to UART / FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces. The FT2232H has the following advanced features:
• Single chip USB to dual serial / parallel ports with a variety of configurations.
• Entire USB protocol handled on the chip. No USB specific firmware programming required.
• USB 2.0 High Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible.
• Dual Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI or bit-bang) design.
• Dual independent UART or FIFO or MPSSE ports.
• RS232/RS422/RS485 UART Transfer Data Rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter).
• USB to Asynchronous FIFO transfer data rate up to 8 Mbyte/Sec.
• Single channel Synchronous FIFO mode for transfers up to 40 Mbytes/Sec
• CPU-style FIFO interface mode simplifies microcontroller interface design.
• UART Interface supports 7/8 bit data, 1/2 stop bits, and Odd/Even/Mark/Space/No Parity.
• Auto-transmit enable control for RS485 serial applications using TXDEN pin.
• Configurable I/O drive strength (4, 8, 12 or 16mA) and slew rate.
• Supports bus powered, self-powered and high-power bus powered USB configurations.
• +1.8V (chip core) and +3.3V I/O interfacing (+5V Tolerant).
• Extended -40°C to 85°C industrial operating temperature range.
• +3.3V single supply operating voltage range.
The FT2232H can be used to transfer data from a PLC (programmable logic control) module to an AI agent that will respond in real time to any problems encountered. Here is a simple block diagram of how the FT2232H can be used in a smart factory application:
Recommended ICs:
- +1 Like
- Add to Favorites
Recommend
- FTDI’s FT232H, FT2232H and FT4232H Can Be Integrated into 5g Network Devices
- FTDI’s USB Interface Chips FT232R Can Be Integrated into Gaming Controller
- FT232 USB Bridge ICs, a Powerful Chip with a Complete USB Protocol
- FTDI’s USB ICs FT602, FT232RN and UART ICs FT-X Can Be Integrated into Drone
- FDTI‘S FTx232H Application in Factory Testing and Programming
- FTDI‘s ICs FT232RN, FT4232HA, FT-X Can Be Integrated into ADAS
- FTDI FTx232H Series USB Hi-Speed to Serial UART/FIFO/JTAG/SPI/I²C ICs in Industrial Control/Monitoring
- FTDI‘s FT230XQ USB to UART IC Can Be Used in Car Diagnostics Devices
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
