3PEAK Releases TPR860x Series Precision Resistor Array Products Matching Accuracy of ±0.01% and Temperature Drift of ±1-ppm/℃
3PEAK (stock code: 688536), a semiconductor company specializing in high-performance analog chips and embedded processors, has introduced its new Precision Resistor Array products, the TPR860x series. The TPR860x series is a quad-resistor matched array with outstanding resistance matching performance and extremely low temperature drift, catering to the voltage and current signal acquisition needs of industrial control, precision measurement, and instrumentation applications.
Advantages of TPR860x
The TPR860x series integrates four independent resistors designed to meet the precise matching requirements of multiple resistance values in various applications. When paired with high-precision operational amplifiers, the resistor array achieves accurate gain settings for precise signal acquisition. The typical application circuit diagram of the TPR860x is as follows:
Typical Application Diagram of TPR860x
In the above application circuit, the resistor array plays a crucial role in the system, primarily in terms of gain accuracy over the full temperature range and Common-Mode Rejection Ratio (CMRR).
Gain Accuracy over the Full Temperature Range
Resistance matching ratio and matching ratio temperature drift are critical factors affecting gain accuracy over the full temperature range. For instance, if a resistor array with a matching ratio of 1% is chosen, the system's resolution will be limited to within 7 bits. In high-precision applications, calibration measures are necessary to mitigate these effects. However, calibrating across the full temperature range is costly and challenging, often limited to room temperature calibration. Therefore, the temperature drift of the matching ratio is crucial.
The TPR860x series offers a maximum matching ratio error of ±0.01% at room temperature (TPR8601A). With a typical temperature drift of 0.1-ppm/℃ and a maximum of 1-ppm/℃ over the range of −40℃ to 125℃, it exhibits excellent performance. The temperature drift distribution chart of the matching ratio is as follows:
Temperature Drift Distribution Chart of TPR860x Matching Ratio
CMRR over the Full Temperature Range
The CMRR matching degree and temperature drift of the resistor array significantly affect the CMRR over the full temperature range. For applications with a wide range of common-mode signals, CMRR is crucial. The mismatch of the resistor array converts common-mode signals into differential-mode signals to introduce interference.
The resistor array's impact on the CMRR matching degree is defined as follows:
Considering only the resistor array, the CMRR is:
When four resistors with the same resistance value and a matching ratio of ±1% are used, only a CMRR of 40-dB can be ensured at room temperature. Calibration at room temperature can eliminate errors, but calibration at high and low temperatures is costly and difficult to achieve. The TPR860x series matches all four resistors and performs exceptionally well in terms of matching and temperature drift affecting the CMRR. Over the full temperature range (−40℃ to 125℃), the maximum deviation of TPR8601A is only ±0.005%, with a typical temperature drift of 0.1-ppm/℃ and a maximum of 1-ppm/℃. The distribution chart is shown below:
Temperature Drift Distribution Chart for TPR860x Affecting CMRR Matching Degree
We constructed a differential amplification system with a gain of 1, utilizing three types of resistor arrays with varying performance levels to investigate and evaluate their impact on system gain accuracy and CMRR. The evaluation revealed that the TPR860x series performs well and reliably over the full temperature range, meeting the high requirements for system gain accuracy and CMRR in the field of precision measurement.
Comparison of the Impact of Resistor Arrays with Different Performance Parameters on the System
TPR860x Product Performance
Matching Performance:
- TPR8601A: 0.0125% Matching at −40℃ to +125℃
- TPR8600/1/2: 0.025% Matching at −40℃ to +125℃
- TPR8603: 0.03% Matching at −40℃ to +125℃
Matching Temperature Drift: 0.1 ppm/℃ (Typical), 1 ppm/℃ (Max)
Operating Voltage Range: −60 V to +60V
Operating Temperature Range: −40℃ to 125℃
The TPR860x series products are available for sample and evaluation board services.
- +1 Like
- Add to Favorites
Recommend
- 3PEAK‘s Automotive-Grade Test Center Officially Commences Operations
- 3PEAK Isolation Products Are Certified to a Full Range of Safety Standards Including VDE, TÜV, UL, CSA, CQC, and CB
- The Only Company in China Included in the IBEE ESD Report! 3PEAK‘s Complete Series of Automotive CAN Transceivers in Mass Production
- 3PEAK Achieves ISO 26262:2018 ASIL D Process Certification, the Highest Level of Automotive Functional Safety
- 3PEAK Unveiled a Next-Generation Automotive-grade High-current Linear Regulator TPL8151Q Supporting Wide Range Input of 29V
- 3PEAK Unveiled Automotive High-Voltage, Low-quiescent Current Voltage Monitor TPV8368Q with High Sense Voltage up to 36V
- 3PEAK Becomes the First Chip Maker in China to Have Two Types of CAN Transceivers Passed German C＆S Compatibility Certification at the Same Time
- 3PEAK Wins Prestigious VDE Premium Quality Award
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
