3PEAK Launches TPAFE51760, a 16-Channel High-Precision ADC Widely Used in Power Automation Devices

2024-03-27 3PEAK News
High-Precision ADC,ADC,analog chips,embedded processors

3PEAK (Stock Code: 688536), a semiconductor company focused on the development of high-performance analog chips and embedded processors, introduces the TPAFE51760, a new 16-channel High-Precision ADC. The TPAFE51760 ADC features a built-in high-precision reference and supports operating temperatures of –40℃ to +125℃. It is widely used in power automation devices such as DTUs, FTUs, and MUs.


TPAFE51760 Advantages

1: Industry-Leading ±30-V Analog Input Over-Voltage Clamp

2: Operational Amplifiers for Integrated Signal Conditioning and Simplified Sampling Circuit to Conserve PCB Space and Enhance Reliability

3: 16-channel Input for Simultaneous Dual-Circuit or Dual-Grid Electricity Network Sampling to Reduce the Number of ADCs and Save PCB Space and Costs

4: 16-bit Resolution for Improved Sampling Accuracy

5: 1MSPS Sampling Rate to Meet the Sampling Timeliness Requirements in Power and Most Other Sectors

6: Industry-Leading DNL and INL Performance; Curves #1–#4 below display actual measurements from competitors


7: Built-in High-Precision Reference with Maximum Temperature Drift of Less Than 10ppm/℃


8: Stable SNR and THD Performance Across Full Temperature Range


9: Industry Leading Input Voltage Tolerance and ESD Capability


Typical Applications for the TPAFE51760


The following flow diagram displays a representative application for DTUs/FTUs in the power industry, where the three-phase voltage and current signals from the power transmission network are input to the ADC either directly after passing through two stages of voltage/current transformers or after signal conditioning through operational amplifiers. The ADC converts these analog signals into digital signals, which are then processed and controlled by the subsequent MCUs.


Thanks to the TPAFE51760's integrated front-end analog signal processing circuit, which has an input voltage range of up to ±10 V, a signal conditioning circuit should not be required for most applications.

Typical Application Diagram for DTUs/FTUs in the Power Industry


The TPAFE51760 is now in mass production. Samples and Evaluation Boards are available.

TPAFE51760 Evaluation Board

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: