SMCJ-H Series Automotive and High Reliability TVS Diodes with Excellent Clamping Capability, High Surge Capability, Low Zener Impedance and Fast Response Time
The SMC-H series TVS Diodes are designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The SMC-H series is supplied in YINT Semiconductor's exclusive, cost-effective, highly reliable, and is ideally suited for use in communication systems, automotive, numerical controls, process controls, medical equipment, business machines, power supplies, and many other industrial/consumer applications.
Features
Case: DO-214AB/SMC
For surface mounted applications to optimize board space.
Polarity: Color band denoted positive end (cathode) except Bidirectional.
Typical failure mode is short from over-specified voltage or current
High Temperature soldering:260°C/10 seconds at terminals.
Terminal: Solder plated, solderable per MIL-STD-750, Method 2026.
AEC-Q101 qualified
Applications
TVS devices are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications.
Electrical Characteristics (@TA=25°C Unless Otherwise Noted)
NOTES:
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA=25℃ per Pulse Derating Curve.
2. Thermal Resistance Junction to Lead.
3. 8.3ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
4. Single Phase, Half Wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
5. VF<3.5V for VBR<200V and VF<5.0V for VBR>201V.
Electrical Characteristics (TA=25℃ unless otherwise noted)
- +1 Like
- Add to Favorites
Recommend
- Yint Electronics Provides Effective Circuit Protection for UWB Positioning Base Stations
- A 12V DC Lightning Protection Solution from Yint
- Yint Electronics Recommends Using a Varistor for Input Overvoltage Protection of Smart Meters
- Yint Electronics MOV 14D561K, TVS SMBJ6.5CA P6SMBJ10CA for Power Line Carrier PLC Interface Circuit
- How To View The Importance Of Power Surges To The System?
- The Applications of PPTC Protection Devices in Wireless Electronic Products, Battery Packs, Chargers, Power Converters and Transformers
- Yint Electronics provides the SD/TF Memory Card Interface Solution
- Yint‘s ESDSR05-4 TVS Meet the Electrostatic Protection Design Of SIM Card Reading Circuit
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.