How to Use the Spectrum Analyzer?
The spectrum analyzer is an instrument used to analyze the characteristics of the signal spectrum. It has many functions and characteristics. With the development of science and technology, many industries need to be used to measure and analyze the signal of the spectrum analyzer. In this article, Baluelec will introduce how to use the spectrum analyzer.
Connect Device: Connect the analyzed signal through the sensor or other interfaces to the spectrum analyzer.
Adjust Settings: Set the parameters of the spectrum analyzer, including the center frequency, bandwidth, and reference level to ensure that the instrument can accurately capture and analyze the signal.
Start Measurement: Open the measurement mode of the instrument and start measurement. The instrument will analyze the signal into a spectrum graph and display it on the instrument screen.
Analyze Results: Analyze the spectrum graphics, understand the frequency characteristics and frequency distribution of the signal, and check and measure frequency, power, harmonic, and other information by selecting areas or parameters of interest.
Save Data: Save the analysis results into the memory or computer of the instrument so that you can refer to or further analyze them later.
It should be noted that when using the spectrum analyzer, you need to comply with relevant security regulations, and you need to choose different types of spectrum analyzers according to different application areas and needs. The spectrum analyzer is also divided into various types. Different types of parameters are different.
- +1 Like
- Add to Favorites
Recommend
- The Role of the Spectrum Analyzer Measurement Spectrum
- Basic Knowledge of Spectrum Analyzer
- The Application Scope of the Spectrum Analyzer
- Handheld DS2800 Spectrum Analyzer Incorporates Unique Test Capabilities that Ensure Proper Installation of Cable Networks and Reduce Service Calls
- OWON XSA800 Series Spectrum Analyzer with Frequencies up to 1.5GHz and 1Hz Minimum Resolution Bandwidth
- PSA080 Spectrum Analyzer Cover the Frequency Band from 5kHz to 8GHz and Has a Noise Level Better than -160dbm
- Handheld Spectrum Analyzer Function
- Baluelec Releases MSG200A Microwave Signal Source Module with the Frequency Range of 9kHz ~ 20GHz
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.