OWON XSA800 Series Spectrum Analyzer with Frequencies up to 1.5GHz and 1Hz Minimum Resolution Bandwidth

2023-06-28 OWON News
Spectrum Analyzer,XSA800

OWON released the XSA800 series Spectrum Analyzer, with frequencies up to 1.5GHz, 1Hz minimum resolution bandwidth (RBW), excellent small signal measurement capability, accurate low-noise measurement, support quick capture function, Pass/Fail function, EMI pre-compliance test function, EMC test function. with multiple interfaces, a 9-inch high-resolution display, and extremely high-cost performance, very suitable for RF R&D, education and training, design verification, and manufacturing.


Product Features

● Frequency rang 9kHz - 1.5GHz

● -160dBm Displayed Average Noise Level (DANL) 

● Phase noise -80dBc/Hz@1GHz and offset at 10 kHz

● Total amplitude accuracy <0.7dB

● 1Hz minimum resolution bandwidth (RBW)

● EMI pre-compliance test kit, optional EMC test software 

● Optional tracking generator (standard tracking generator hardware, can be remotely upgraded according to needs)

● Waterfall plot graphic, modulation signal quality analysis, audio demodulation, etc. multiple general and extended test functions

● Standard Pass/Fail on-site test and alert function

● Adopt all-digital intermediate frequency technology

● Multiple interfaces: USB Host, USB Device, LAN, earphone interface, HDMI

● 9-inch LCD, high resolution 1280×800 pixels


1Hz minimum resolution bandwidth (RBW), effectively distinguishing the nearby signals


Quick capture function

Car remote keys, TPMS tire pressure modules, and small wireless modules usually use ASK/FSK modulation. XSA800 can complete the capture of ASK/FSK signals, and directly obtain its center frequency, power, and offset parameters.


Excellent small signal measurement capability

-160 dBm DANL (Displayed Average Noise Level), can observe weaker small signals


More accurate low-noise measurements

Phase Noise < –80dBc/Hz @1GHz at 10kHz offset

Pass/Fail function

Quickly determine if the test results pass

Provides EMI pre-compliance test function

Equipped with an EMI filter (6dB) and a quasi-peak detector as standard, it is more accurate for EMI pre-test and diagnosis, and complete testing and production reports can be completed by using supporting software.

Provide EMC test function (requires optional software)

Built in more than 200 mainstream EMC test standards and regulations templates. The user selects the corresponding template, and the software automatically sets the spectrum analyzer and records the test data. The data and regulations can be compared on the same screen. Users can also customize regulations for comparative analysis.


  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: