OWON Launched HDS200 Series Handheld Three-in-one Oscilloscope for Outdoor Maintenance and Rapid On-site Measurement

2023-06-30 OWON News
handheld three-in-one oscilloscope,handheld oscilloscope,oscilloscope,HDS200

OWON launched the HDS200 series handheld three-in-one oscilloscope. This series integrates a 70MHz oscilloscope, 20,000 counts multimeter, and a 25MHz waveform generator, small and light, defined as an entry-level handheld oscilloscope, suitable for outdoor maintenance and rapid on-site measurement.


Product Features

HDS200 series handheld oscilloscope, integrated 70MHz oscilloscope, 20,000 counts multimeter, 25MHz waveform generator; 3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use; 18650 lithium battery power, providing up to 6 hours working time; USB Type-C interface, support adapter or power bank power supply, support PC software connection; support self-calibration function.


Excellent oscilloscope performance

+ Dual channels input, bandwidth up to 70MHz, max. real-time sampling rate 250MSa/s

+ Max 10,000 wfms/s waveform refresh rate

+ Max 8k record length

+ Cursor measurement function

+ Multiple auto measurement functions

+ XY function

+ One-key auto set function, easy to detect and debug


Multimeter

+ 20,000 counts, true RMS

+ Voltage, current, resistance, diode, capacitance measuring, and continuity test

+ Auto range function, easy to detect and debug

+ Max AC 750V, DC 1000V input voltage

+ Independent input of multimeter and oscilloscope

+ Reading hold function

+ Relative measurement function

 

Waveform Generator
(Only for HDS242S & HDS272S)

+ Output sine, square, ramp, pulse, and built-in special waveforms

+ Max 25MHz frequency output

+ 0.1Hz frequency resolution

+ 14-bit vertical resolution, 125MSa/s high sampling rate

+ 8k waveform length

+ Max 5Vpp output amplitude


One-handed grip; Integrated encapsulation design, not easy to peel off after long-term use, and the hand feel is better.

3.5-inch (320×240) high-resolution TFT color LCD screen, clear and delicate display for observing waveform details.


Independent input of multimeter and oscilloscope; plastic shell design of the BNC makes the test safer.


Powered by a 4400mAh lithium battery, work continuously for about 6 hours. A single battery can supply power normally. Easy battery replacement.

USB Type-C interface can be charged by an adapter or a power bank and supports PC software connection.


Max 10,000 wfms/s refresh rate, 8k record length, easy to capture exceptional and low probability events.


20,000 counts, support measuring voltage, current, resistance, diode, capacitance, and continuity test; support relative value measurement.


Output sine, square, ramp, pulse, and built-in special waveforms. Max 25MHz frequency output, 0.1Hz frequency resolution.

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: