Several Knowledge Points about Programmable Crystal Oscillator Chips
What is a programmable crystal oscillator? Programmable crystal oscillators are mostly active crystal oscillators, consisting of two chips; one is an all-silicon MEMS resonator, and the other is a chip with a temperature compensation function that can start the circuit phase-locked loop CMOS. It uses standardized semiconductor chip MCM packaging. Fully automated standard semiconductor manufacturing processes can be used, such as ICs used in current electronic product design, which have very good stability and quality; human errors cannot occur during the production process.
Fig.1
A programmable crystal oscillator has a nice name: silicon crystal.
Generally speaking, a programmable crystal oscillator provides your crystal oscillator parameters, such as frequency deviation, operating voltage, load capacitance, frequency, etc., to the crystal oscillator manufacturer. Manufacturers can program through computers and other equipment and press the OK button to write these parameters into the blank chip.
Usually, the production lead time is 1-3 days. We know that for conventional passive crystal oscillators or active crystal oscillators when the wafers are in stock, the production lead time is 2-3 weeks, the regular lead time is about 4-6 weeks, and the special period is 2-3 months.
Therefore, in terms of lead time, programmable crystal oscillators not only have advantages in lead time but also in frequency. Functionally, the problem of temperature drift is eliminated.
Fully automatic semiconductor technology (chip level), no air tightness issues, no vibration! Integrated temperature compensation circuit, no temperature drift in the whole temperature range, -40~85℃ full temperature guarantee; mean time between failures (MTBF) up to 500 million hours! Low jitter, low power consumption, high temperature, high pressure, high humidity, and good earthquake resistance.
Supports any frequency point from 1-800MHZ, accurate output to 5 decimal places. Such as: 65.53500MHz). Supports multiple working voltage matching of 1.8V, 2.5V, 2.8V and 3.3V! Supports 10PPM, 20PPM, 25PPM, 30PPM, 50PPM and other precision matching! International standard QFN package 33607050, 5032, 3225, 2520 programmable crystal oscillator is suitable for communication equipment such as clocks, digital products, car digital, mobile phones, walkie-talkies, digital cameras, MID tablets, optoelectronic technology, and various frequency conversion speed regulation equipment.
- +1 Like
- Add to Favorites
Recommend
- How to Prevent the Bad Phenomenon of Crystal Vibration?
- YXC Programmable Oscillator 7.3728MHz, Package 7050, Operating Voltage 3.3V, Used in Diagnostic Instruments
- Aeonsemi Introduced the High-Performance CMOS Programmable Oscillators, with Total Stability Better than ±50 ppm
- YXC Programmable Differential Crystal Oscillator, Frequency 148.5MHz, LVDS Output, 5032 Package, Used in High-end Cameras
- Child Presence Detection-Aker C1E Crystal Series Meet the Accuracy Requirements for CPD Applications
- YXC Programmable Differential Crystal Oscillator YSO210PR Series, Frequency 155.52MHz, LVPECL Output, Used in Switches
- Temperature Compensated Crystal Oscillator Is Also One of The Quartz Crystal Oscillators, Referred to as “temperature Compensated Crystal Oscillator“
- YXC Programmable Differential Oscillator, Frequency 50MHz, 7050 package, LVDS output, applied to SVG
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
