Programmable Crystal Oscillator: SG-8101CG/SG-8101CE/SG-8101CB/SG-8101CA
■Epson’s SG-8101 series are Programmable Crystal Oscillator series with CMOS output. While this series offer the same easy programmability of frequencies and other parameters as comparable earlier SG-8002/SG-8003 series, they also have a wider operating temperature range, with a top-end limit of 105°C. In addition to a 2.5 × 2.0 mm package that will enable electronics manufacturers to save board space, the oscillators will also be available in the following popular package sizes: 3.2 × 2.5 mm, 5.0 × 3.2 mm and 7.0 × 5.0 mm. The oscillator in the SG-8101 series have an approximately 66 % tighter frequency tolerance and 50 % lower current consumption than comparable products, and can be used under a wide range of environmental conditions. This will also significantly contribute to performance, lower power requirements, fast development cycles, and low-volume production.
●Features:
■Crystal oscillator (Programmable)
■Output frequency: 0.67 MHz to 170 MHz (1 × 10^-6 Step)
■Output: CMOS
■Supply voltage: 1.62 V to 3.63 V
■Frequency tolerance, Operating temperature
▲±15 × 10^-6 / -40 °C to +85 °C,
▲±20 × 10^-6, ±50 × 10^-6 / -40 °C to +105 °C
|
SG-8101CG 、 SG-8101CE 、 SG-8101CB 、 SG-8101CA 、 SG-8101 series 、 SG-8101 、 SG-8002 、 SG-8003 series 、 SG-8003 、 SG-8002 series 、 X1G005181xxxx00 、 X1G005211xxxx00 、 X1G005201xxxx00 、 X1G005191xxxx00 、 X1G005181xxxxxx 、 X1G005221xxxxxx 、 X1G005201xxxxxx 、 X1G005191xxxxxx 、 SG-8101CA 25.000000MHz TCHPA |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2021/05/21 |
|
|
Ver1.01 |
|
|
SG-8101series_E_Ver1.01 |
|
|
2.7 MB |
- +1 Like
- Add to Favorites
Recommend
- Epson New SPXO SG-8201CJA: Low jitter, High Stability, Small Size and Programmable Designed for ADAS Applications,Automotive AEC-Q100 Compliant, 125 ℃ Operation
- News | Epson Launches 4th-Generation Optical Engine for Smart Glasses
- Epson is currently launching samples of the new spxos for automotive applications
- Seismic Intensity Meters Equipped with Epson‘s M-A352 Accelerometer Certified by the Japan Meteorological Agency
- Epson Develops an New Industrial 3D Printer that Can Use Commonly Available Materials
- High-stability GYRO Sensor by Epson with Bias Output Stability and Low Noise
- Epson to Start Selling New Sensing Technologies and Launch New Sensing Analysis Technology Business
- Epson Becomes the Manufacturing Industry‘s First to Switch to 100% Renewable Electricity at All Sites in Japan
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
