How to Prevent the Bad Phenomenon of Crystal Vibration?
How to prevent the occurrence of bad crystal vibration phenomenon? HUIYUAN CRUSTAL answered the question and conducted leakage detection tests on crystal vibration components to check their tightness, the details are as follows:
The sealing process is to package the tuned resonator with the housing to stabilize the electrical performance of the quartz resonator. During this process, the feed bin, pressure seal bin and discharge bin shall be kept clean. The pressure seal box should be flushed continuously. During the pressure seal process, pay attention to welding head wear, mold position, voltage, air pressure and flow. Its quality standard is: no scar, burr, top pit, bent leg, brand symmetry without skew.
Because the quartz crystal is a passive element, it is provided by IC appropriate excitation power and can work normally, so, when the excitation power is too low, the quartz crystal is not easy to start vibration, too high, will form extreme; The quartz chip is damaged, causing the vibration to stop. Therefore, appropriate excitation power should be provided. In addition, the active power load will consume a certain amount of power, so as to reduce the crystal's Q value and make the crystal's stability decline, vulnerable to the influence of the surrounding active elements, in an unstable state, vibration phenomenon occurs. Therefore, when the active power load is increased, it should be matched with a more appropriate active power load.
Control the cutting and welding process to ensure the insulation performance of the base and the quality of the inserting needle. The inserting needle coating is bright and uniform, and the surface is free from hemp, deformation, cracks, discoloration, scratches, stains and peeling of the coating. To better prevent a single leak, an insulating spacer can be placed below the crystal.
When the crystal produces frequency drift and exceeds the frequency difference range, it should be checked whether the appropriate load capacitance is matched, which can be solved by adjusting the load capacitance of the crystal.
- +1 Like
- Add to Favorites
Recommend
- Quartz Crystal Storage Standard
- What Problems Should Be Paid Attention to in the Use of Chip Crystal Oscillator?
- How to Choose a High-quality Crystal Oscillator?
- How to Distinguish the Pin Direction of the Chip Crystal Oscillator?
- What Does a Crystal Oscillator Do?
- Main Functional Materials of Quartz Crystal Resonators
- How to Distinguish the Position Direction of SMT Crystal Oscillator?
- The Difference Between a Quartz Crystal Resonator and a Quartz Crystal Oscillator
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
