Yint Electronics Recommends Electrostatic Protection Device ESD0524P for HDMI, VGA, DVI, Mini DP Video Data Interface
The biggest problem with laptops having only one Type-C interface is that it causes trouble for IT professionals to connect projectors. Traditional wired projectors generally need to use VGA or HDMI interfaces to connect. This is also one of the biggest driving forces for the development of docking stations.
To ensure high-speed data and control signal transmission, interference factors such as static electricity need to be eliminated as much as possible.
Fig.1
Fig.2
HDMI protection devices generally require small packages to facilitate component layout and PCB wiring (Figure 10); and ultra-small capacitance (1pF).
It is recommended to use YINT Electronics electrostatic protection device ESD0524P, which is packaged in DFN2510 and is 0.35pF. Its main parameters are as follows:
Fig.3
- +1 Like
- Add to Favorites
Recommend
- Yint offers a LVDS (Low Voltage Differential Signaling) Interface Protection Scheme Based on Protection Device ESD0524P
- YINT‘s ESD0524P ESD Protection Diode Design with Only 0.5mm Pitch to ESD Protection Circuits for HDMI
- Yint Offers Analog Video Interfaces Protection
- A 12V DC Lightning Protection Solution from Yint
- Yint Electronics Recommends Using a Varistor for Input Overvoltage Protection of Smart Meters
- Yint Electronics Provides Effective Circuit Protection for UWB Positioning Base Stations
- Yint Electronics MOV 14D561K, TVS SMBJ6.5CA P6SMBJ10CA for Power Line Carrier PLC Interface Circuit
- How To View The Importance Of Power Surges To The System?
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.