ESD0524P DFN2510 Plastic-Encapsulate Diodes
■ESD0524P is an ultra-low capacitance Transient Voltage Suppressor (TVS) designed to protection for high-speed data interfaces. With typical capacitance of 0.2pF (I/O to I/O) only, ESD0524P is designed to protect parasitic-sensitive systems against over-voltage and over-current transient events. It complies with IEC 61000-4-2 (ESD), Level 4(±15KV air, ±8KV contact discharge), IEC61000-4-4 (electrical fast transient-EFT) (40A, 5/50ns),very fast charged device model (CDM) ESD and cable discharge event(CDE), etc.
■ESD0524P uses ultra-small DFN2510 package. Each ESD0524P device can protect four high-speed data lines. The combined features of ultra-low capacitance, ultra-small size and high ESD robustness make ESD0524P ideal for high-speed data ports and high-frequency lines (e.g., HDMI &DVI) applications. The low clamping voltage of the ESD0524P guarantees a minimum stress on the protected IC.
●Features
■Transient protection for asymmetrical data lines
■IEC61000-4-2 (ESD) ±25kV (air), ±20kV (contact)
▲IEC61000-4-4 (EFT) 40A (5/50ns)
▲Cable Discharge Event(CDE)
■Package optimized for high-speed lines
■Protects four data lines
■Marking: 0524P
■Low capacitance: 0.2pF ( I/O to I/O)
■Low leakage current
■Low clamping voltage
■Each I/O pin can withstand over 1000 ESD strikes for ±8KV contact discharge
Plastic-Encapsulate Diodes 、 Ultra Low Capacitance ESD Protection Array 、 ultra-low capacitance Transient Voltage Suppressor 、 TVS |
|
[ Serial ATA ][ High Definition Multi-Media Interface ][ HDMI ][ Desktops ][ Servers ][ Notebooks ][ USB 2.0 Power and Data Line Protection ][ USB 3.0 Power and Data Line Protection ][ Digital Visual Interface ][ DVI ][ high-speed data ports applications ][ high-frequency lines applications ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
DFN2510 |
|
English Chinese Chinese and English Japanese |
|
2022/12/2 |
|
Rev:2020A0 |
|
T20427A0 |
|
1.4 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.