Low-dropout Linear Regulator Au8011A with a Low Dropout of 75mV max at 1A and Input Voltage Range from 1.1V to 6.5V

2023-12-07 Aurasemi
low-dropout linear regulator,LDO,Au8011A,Au8011BA-DNR

The Au8011A is a low-noise (6µVRMS), low-dropout linear regulator (LDO) capable of sourcing 1A with only 75mV of max dropout. The device output voltage is adjustable from 0.8V to 5.15V using an external resistor divider.  


Au8011A is the ideal choice to power noise-sensitive components found in high speed interfaces such as SERDES, and communication infrastructure such as High Speed ADCs, DACs, and RF components due to its exceptional PSRR and low noise (6µVRMS) characteristics.  


The 5V output capability of this device is well suited for RF amplifiers and RF front end. The Au8011A device is also well suited for digital loads such as ASICs, FPGAs, and DSPs that require a low-input voltage and low-output voltage to minimize power dissipation while providing excellent transient performance that caters to current steps in digital loads due to clock domain switching, dynamic power and frequency scaling. The soft-start capability minimizes in-rush current, thereby allowing for a smooth and reliable start-up at the system level.  


Features 

Low Dropout: 75mV max at 1A  

1% (max) Accuracy Over Line, Load, and Temperature  

Output Voltage Noise: 6µVRMS at 0.8V Vout

Input Voltage Range:1.1V to 6.5V  

Output Voltage Range:0.8V to 5.15V (Set by resistor divider)  

Excellent PSRR of 36dB at 1MHz  

Stable with low ESR ceramic cap 

Supports Power Good function

Excellent Load Transient Response 

Adjustable Soft-Start In-Rush Control

3mm × 3mm, 8-Pin DFN  


Applications 

Telecom MIMO RF front end components  

Digital Loads: SerDes, FPGAs and DSPs  

High-speed Analog Circuits:  VCO, ADC, DAC and LVDS


Absolute Maximum Ratings

ESD Ratings

Recommended Operating Conditions

Thermal Information

Ordering Information

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: