6W Power Amplifier Au6494 Operates over A Frequency Range of 2.1GHz to 2.2GHz, and Has High Gain and Peak Power
The Au6494 is a high efficiency 6W Power Amplifier suitable for application in FDD and TDD small cell base stations as well as general purpose amplification. It operates over a frequency range of 2.1GHz to 2.2GHz. The RF input and output ports are internally matched to 50Ω for the full frequency range. This device incorporates a device enable pin with turn-on/off times of less than 1μs.
The power amplifier has high gain and peak power which linearizes well in DPD systems giving better than 50dBc ACLR for 20MHz modulation bandwidth.
This amplifier uses an asymmetric Doherty architecture. The RF input does not require a DC block provided the input connection is at 0V DC. The RF output has an internal DC block.
Functional Diagram
Features
Frequency 2.1GHz to 2.2GHz
High Peak Envelope Power 37.5dBm
High Efficiency 33%
High Small Signal Gain 37dB
Instantaneous Bandwidths up to 60MHz
Single Supply Domain +5V
Enable/shutdown pin
Package: 5x5mm
Applications
5G Small Cell applications
MIMO Systems
3GPP bands n1, n65, n66
Driver amplifier
General purpose wireless
Absolute Maximum Ratings
Recommended Operating Conditions
Ordering Information
- +1 Like
- Add to Favorites
Recommend
- 8W High Efficiency Power Amplifier Au6498 with 39ddBm High Peak Power and A Wide Frequency Range of 2.5GHz~2.7GHz
- High Efficiency 6W Power Amplifier Au6491, Operates Over A Frequency Range of 1.8GHz to 1.9GHz
- 6W Power Amplifier AU6492 Operates over A Frequency Range of 2.3GHz to 2.4GHz and Has 37.5dBm High Peak Power
- 3.3GHz~3.7GHz 8W Power Amplifier Au6420, Giving Better Than 45dBc ACLR for 200MHz Modulation Bandwidth
- Low-dropout Linear Regulator Au8011A with a Low Dropout of 75mV max at 1A and Input Voltage Range from 1.1V to 6.5V
- Keysight Introduces New Method，Iterative Learning Control test method to Accelerate Power Amplifier Digital Pre-Distortion Test Speeds
- Power Amplifier: The Key Device for Communication Applications
- Power Amplifier Design Using HBT Technology
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
