6W Power Amplifier AU6492 Operates over A Frequency Range of 2.3GHz to 2.4GHz and Has 37.5dBm High Peak Power
The AU6492 is a high efficiency 6W Power Amplifier suitable for application in FDD and TDD small cell base stations as well as general purpose amplification. It operates over a frequency range of 2.3GHz to 2.4GHz. The RF input and output ports are internally matched to 50Ω for the full frequency range. This device incorporates a device enable pin with turn on/off times less than 1μs.
The power amplifier has high gain and peak power which linearizes will in DPD systems giving better than 50dBc ACLR for 20MHz modulation bandwidth.
This amplifier uses an asymmetric Doherty architecture. The RF input does not require a DC block provided the input connection is at 0V DC. The RF output has a DC block internally.
Features
• Frequency 2.3GHz to 2.4GHz
• High Peak Power 37.5dBm
• High Efficiency 33%
• High Small Signal Gain 37dB
• Instantaneous Bandwidths up to 60MHz
• Single Supply Domain +5V
• Enable/shutdown pin
• Package: 5X5 mm
Applications
• 5G Small Cell applications
• MIMO Systems
• 3GPP bands n30, n40, n97
• Driver amplifier
• General purpose wireless
Absolute Maximum Ratings
Recommended Operating Conditions
Ordering Information
- +1 Like
- Add to Favorites
Recommend
- 8W High Efficiency Power Amplifier Au6498 with 39ddBm High Peak Power and A Wide Frequency Range of 2.5GHz~2.7GHz
- High Efficiency 6W Power Amplifier Au6491, Operates Over A Frequency Range of 1.8GHz to 1.9GHz
- 6W Power Amplifier Au6494 Operates over A Frequency Range of 2.1GHz to 2.2GHz, and Has High Gain and Peak Power
- 3.3GHz~3.7GHz 8W Power Amplifier Au6420, Giving Better Than 45dBc ACLR for 200MHz Modulation Bandwidth
- Low-dropout Linear Regulator Au8011A with a Low Dropout of 75mV max at 1A and Input Voltage Range from 1.1V to 6.5V
- Keysight Introduces New Method，Iterative Learning Control test method to Accelerate Power Amplifier Digital Pre-Distortion Test Speeds
- CHA6356-QXG, a 21-23.6GHz Power Amplifier Producing 2W Output Power with an Integrated Power Detector
- UMS Enlarges its Telecom Power Amplifier Offer, Boosting your radio with UMS Power Amplifiers
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
