What is Thermal Simulation and Why is it Important to Reliability Burn-in Testing?

PublishTime： 2023-11-22 Article Source：Smiths Interconnect Blogs

Not every semiconductor manufacturer utilizes thermal simulation in their reliability testing setup. Lower power burn-in allows for an acceptable temperature rise within the package/die in a traditional burn-in chamber running at 125℃. As packages in burn-in are moving to higher power output, socket, and burn-in systems may need to have enhanced features to manage the desired target die temps. At Smiths Interconnect, Smiths Interconnect conducts thermal simulation prior to burn-in board and socket manufacture to more effectively narrow down and identify necessary features for sockets and systems. Then, Smiths Interconnect is set up for efficiency in the burn-in testing phase.

Defining thermal simulation

Thermal simulation is required to ensure the socket design parameters cooperate with the burn-in system to maintain target die temp. Thermal simulation takes away a lot of the extra iteration so that Smiths Interconnect see specifically where to make changes and adjustments for the best outcome.

With this full representation of Smiths Interconnect product in the context of our customer’s system, Smiths Interconnect can narrow a more exact, particular solution for what they need.

When is thermal simulation necessary?

Smiths Interconnect high-power test sockets are built to handle the most extreme temperatures, which means Smiths Interconnect works with many customers whose devices run at peak heat. So, we utilize thermal simulation often.

Here’s how Smiths Interconnect determines whether thermal simulation is necessary.

The customer sets a temperature Smiths Interconnect needs to test – and Smiths Interconnect provides the hardware to withstand that temperature and to help cool that temperature down to the desired point.

Whether or not Smiths Interconnect conducts thermal analysis depends on the nature of the device.

1. Is it a standard low-power device that will experience standard, lower temperatures?

2. Or is it a high-power device that will experience higher temperature?

As soon as you cross over to high-power, you start having to answer these questions about heat resistance. When working with high-power/high-temp devices, Smiths Interconnect needs to utilize thermal analysis.

The other case where Smiths Interconnect may not need thermal simulation is if Smiths Interconnect has worked with a similar device with similar needs or requirements before. Smiths Interconnect uses Smiths Interconnect expertise to better predict what’s going to happen based on a known precedent of what Smiths Interconnect has already done. That way, Smiths Interconnect is able to save time in the burn-in process.

The importance of high-power sockets and inner components in thermal simulation and burn-in testing

Smiths Interconnect's job is to ensure Smiths Interconnect puts the right components into the customer’s socket, whether it’s heat sinks, fans, water blocks, etc. Then, Smiths Interconnect conducts the simulation and adjusts components accordingly. It can get a little tricky when we have parts that are tiny relative to big ones.

For example, a customer could have a smaller surface with a 10-watt temperature rise. So, while the wattage is lower, the surface area is so small that the package may overheat and melt. Through thermal simulation, Smiths Interconnect is able to see if a high-power socket will withstand the temperature rise for such a small surface.

In thermal testing, Smiths Interconnect is able to see if sockets are even the right component. Smiths Interconnect experts can make recommendations outside of socket design.

What happens after thermal simulation?

Once Smiths Interconnect knows the problem and establishes solutions unique to your application, Smiths Interconnect starts putting your product to the test, moving into the burn-in phase.

Burn-in testing – or high-temperature operating life (HTOL) testing – is a testing process designed to detect early failures in components and reduce the potential for defects and failures in the field. During burn-in, the component endures extreme operating conditions, including temperature extremes, high-use cycles, and high voltages.

Performing burn-in accelerates a component’s lifespan beyond the point of premature failures to weed out defective parts. Components that have passed the burn-in test are highly likely to provide reliable service for the duration of a product’s life.

Summary of socket high-power burn-in testing process:

Thermal simulations: Smiths Interconnect identifies the issue and makes solid predictions for improving efficiency within each socket’s makeup.
Components built to handle the extreme: Smiths Interconnect socket solutions can handle up to 200℃ (392℉) and accommodate higher pin counts, making them suitable for high-performance electronic devices.
Improved electrical performance: Smiths Interconnect socket solutions offer enhanced electrical performance, with better signal integrity, lower crosstalk, and better impedance control.
Customization: Smiths Interconnect offers greater design flexibility, allowing for customization and optimization of the socket design to meet specific application requirements (for cooling and heating inter components, for example).
Cost- and time-effectiveness: Sockets are produced through automated assembly, reducing manufacturing time and costs.
Expert engineering support: Smiths Interconnect US-based experts can work in real-time (also global).

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

New Products & Solutions

More>

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Integrated Circuits