Dual Op AMP and Voltage Reference HM4310, Designed to Regulate the Output Current and Voltage Levels of Switching Battery Chargers and Power Supplies
HONGMAO SEMICON HM4310 Dual op AMP and voltage reference is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies.
The device contains two Op Amps and a 2.5V precision shunt voltage reference. Op Amp 1 is designed for voltage control with its non-inverting input internally connected to the output of the shunt regulator. Op Amp 2 is for current control with both inputs uncommitted. The IC offers the power converter designer a control solution that features increased precision with a corresponding reduction in system complexity and cost.
FEATURES
● Op Amp
Input Offset Voltage: 0.5mV
Supply Current: 75μA per Op Amp at 5.0V Supply Voltage
Unity Gain Bandwidth: 1MHz
Output Voltage Swing: 0 to VCC~1.5V
Power Supply Range: 3 to 36V
● Voltage Reference
Fixed Output Voltage Reference: 2.5V
Reference Voltage Tolerance HM4310±0.4%,
Sink Current Capability: 0.05 to 80mA
Typical Output Impedance: 0.2Ω
APPLICATIONS
Battery Charger
Switching Power Supply
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING CONDITIONS
- +1 Like
- Add to Favorites
Recommend
- HM3430/HM3430A/HM3430D8 High efficiency, 3A synchronous rectification Step-Down converter, Operates Over A Wide Input Voltage Range of 2.5V to 5.5V
- Linear Voltage Regulator HM6220 Guaranteed 150mA Output and Offered Better than 1% Initial Accuracy
- Cmsemicon‘s New BAT32A2 Series 32-bit MCU Complying with AEC-Q100 Standard Boosts Intelligent Automotive
- ROHM‘s New Zero-Drift Op Amp with High Accuracy Regardless of Temperature Changes, Offering 9µV Input Offset Voltage
- ROHM Introduces New BD77502FVM 2-Channel High-Speed Ground Sense CMOS Op Amp
- ROHM Develops the Industry‘s Smallest* CMOS Op Amp Optimized for Smartphones and Compact IoT Devices
- ROHM Develops a New Op Amp that Minimizes Current Consumption, Improving Power Savings in Consumer and Industrial Equipment
- Runic OP Amp RS8551, LDO RS3002 and RS3226 Series Apply in Hand-Held Infrared Thermometer Detector
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.