Maximum flexibility in the control cabinet with the Control bus system with up to four phases
In order to use the space available more efficiently when planning control cabinets, alternatives to cable ducting and long cable bonding are increasingly becoming necessary. Depending on the cable cross-section, cable ducts can become overfilled, which causes confusion. The manufacturer FTG(Sub-brand of Amphenol-GIS), from Triberg in Germany, has therefore added the flexible “BusSpeed” system to its range, with immediate availability. This offers shorter feed routes to up to four potentials – without any cable transfer ducting.
FTG has recently expanded its extensive range even further with its up-to-4-pole, flexible control bus system BusSpeed. The control buses are generally used in control cabinets, where the need for individual solutions for power distribution and connection is highest. With a variation of devices of different sizes, a faster, simpler infeed can easily be achieved using cables. There is thus no need to calculate additional space for cable transfer ducts in the control cabinet.
The design of the BusSpeed system means that the buses can be installed vertically and horizontally directly onto the mounting plate using a selection of different fixing brackets. Add-ons can be affixed to as many poles as required and are available in lengths up to 1.855 m. Because the assembly of the live bar allows up to four potentials including labeling on the fixing brackets, as many infeeds as necessary are possible. If a shorter live bar assembly is required, it can be cut to individual lengths or precut in the factory. Separation of the bar to divide the potential is also easy with disconnection. The bars in polished brass and galvanized copper are suitable for voltages between 32 A and 125 A.
Depending on the customer’s requirements in terms of control cabinets, the manufacturer offers a combination of other flexible systems from its over 10,000 products to allow maximum adaptability. These include the 250A phase bar Auxiclic and countless other components for power distribution and connection in control cabinets. To give more space here, the compact BusSpeed control bus system from FTG is the top choice if efficient, space-saving solutions are to be realized.
The BusSpeed control buses from FTG provide needs-based solutions in control cabinet designs up to 1.855 m in height.
- +1 Like
- Add to Favorites
Recommend
- Amphenol-GIS Offered Busbars for Arc Fault Detection Devices (AFDD)
- Simple and Compact Solar Busbars of FTG (Sub-brand of Amphenol-GIS)
- Amphenol-GIS KA42 Connection Terminal Now Available with Protection Class IP44
- Amphenol-GIS Distribution Block PDB Solar Serves as a Transfer Point between Solar Panels and Switches in Solar Applications
- Amphenol-GIS Busbars for SPD Type 2 to Meet a Fast and Pre-assembled Wiring
- Amphenol-GIS Anounced the STI Isolated Stud Terminals Allowing Rated Currents of up to 415A and an Operating Voltage of up to 1KV
- High Currents and a Secure Connection When there is Only a Little Space, Amphenol-GIS’s Fully Encapsulated Busbars are the Best Choice
- Cooperation on Wireless Charging Solutions: LAPIS Technology and Shanghai Amphenol Airwave join forces Providing one-stop support for implementing wireless charging functions
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.