Futureway®PTFE Tape Film Product

2023-10-21 Futureway News
PTFE Tape Film,Teflon film,non directional film,Polytetrafluoroethylene oriented film

Futureway®PTFE Tape Film Product

Teflon film is obtained by turning. It is molded into a tubular blank with suspended teflon resin, sintered in an oven, cooled and mature blank, and then turned by lathe or cutting machine. Therefore, many people call it Teflon turning film. The PTFE turning film shall be rolled flat and the end face shall be neat. The film surface shall be free of creases, cracks, holes, mechanical damage and other defects that} affect the use requirements.


Teflon film is a kind of non directional film, and the surface is a little dark, which is the same as that of Teflon turning plate. In order to make the molecules of the turning film closer, enhance its pressure resistance, and make the thickness of the turning film more uniform. Through calendering, we reprocess the turning film to make it into an oriented film. After calendering, the molecular structure of the film is compact, the compressive strength is increased, the surface is smooth and crisp, the appearance is more flat, high-density, translucent or transparent.


polytetrafluoroethylene film oriented film is used to manufacture capacitors; Semi directional film is used for conductor insulation; Non directional film is used for wiring insulation of electrical instruments or as sealing gasket material. It can also be used as material for debonding and demoulding, high-frequency heating cable, temperature resistant wire, communication wire and cable, and other high-tech cutting-edge technologies in military industries such as aerospace and aviation. There are many specifications of PTFE directional film. During customization, the turning film shall be produced according to the specification requirements, and then calendered and oriented. The thickness during calendering shall not be too thick, otherwise, it will not reach the required thickness; If the turning film is too thin, it can not play the role of calendering orientation. In addition, the temperature control of calender is also a very important factor. The tetrafluoro turning film can be operated easily and ensures quality only within a certain temperature range. The between the two rollers shall be kept parallel to ensure uniform thickness of the directional film.


Polytetrafluoroethylene oriented film calendering polytetrafluoroethylene film shall be packaged reliably during transportation to prevent damage, impact, extrusion, sunlight, and rain. The products shall be stored in a clean warehouse free from extrusion and direct sunlight. Pure polytetrafluoroethylene has a pure white appearance, which makes it easy to absorb miscellaneous substances, which affects the appearance and increases the scrubbing workload, which needs to be sealed for disposal.


  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: