Vincotech’s Three-Level NPC Module for up to 120kVA Minimized Your Solar, UPS, and ESS Applications Losses

2023-10-15 Vincotech News
Three-Level NPC module,three-level NPC inverter,NPC module,flowNPC 2

Opt for Vincotech’s three-level NPC inverter and your solar, UPS, and ESS applications are sure to benefit from maximum power density and minimum losses. High efficiency, low weight, and small size—the flowNPC 2 module (200A and 300A) was built specifically to address these key design challenges. Featuring the latest-generation IGBT technology in a low-inductive, 13 mm flow 2 package, it supports frequencies up to 50 kHz. The proven NPC architecture delivers the best performance, particularly at higher frequencies, and reduces costs by as much as 10% compared to other popular three-level architectures such as MNPC.


Three-Level NPC module Main benefits

  • High power density enables designs up to 120kVA

  • Fully rated diodes provide full reactive power capability

  • Higher frequencies can be achieved with lower losses

  • Smaller passive components enable lighter designs


Features

  • Diodes optimized for solar, UPS, and ESS applications

  • Enables frequencies up to 50kHz

  • 650 V components

  • Available for 200A and 300A

  • Packaged in the low-inductive, 13mm flow 2 package



Topologies Benchmark

  • Equipped with the latest-generation IGBT S5, the Three-Level NPC module delivers the best performance at and above 8 to 10kHz when Si components are used

  • 10% lower costs with NPC vs. MNPC with the same current rating


Possible Applications

  • SMPS

  • Solar

  • UPS

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: