Connection Terminals adapted for DIN rail mounting, KA Terminal Series Offer Space-saving And Easy Mounting to The Installer
With the DIN rail holder (KAH) for its cost-effective KA terminal series, FTG adds another customer advantage to its range for simple power supply in outdoor areas. The clamp, which was specially manufactured at the Black Forest factory in Triberg, will provide more comfort and improved handling in mounting on DIN rails.
Especially in Eastern European countries, the wiring system in street lights, as a conventional application, is often unsafe. By contrast, the cost-intensive variant applied in the German market is a complete solution. However, it requires more space than other applications and offers less flexibility in street lights. Here FTG saw a need for development.
Already in 2015, the manufacturer had designed its cost-effective KA terminal series for the distribution of power supply in street lights and ring circuits in the Scandinavian market. The assortment was supplemented by the measuring point and connection terminal KA42SP, a further development of the connection terminal KA42. With 4 mm² input and output, it is protected against splashing water with protection class IP44 and enables the connection of aluminum as well as copper conductors.
FTG has now supplemented the terminal series KA50x with the DIN rail holder (KAH). This considerably simplifies the handling with regard to the assembly sequence and additionally saves space in height. First, snap the holder onto the DIN rail. The cable has to fit in length to fix into the clamp. The clamp is quickly closed and then easily pushed onto the holder. Despite the compact design, currents up to 160 A can flow. For outputs, terminal points of up to 6 mm² are available.
The KA terminal series offer space-saving and easy mounting to the installer. In contrast to conventional distribution boxes of street lights, the Connection Terminals or small distribution blocks from FTG are a cost-effective alternative. The complete portfolio of the manufacturer, which includes numerous other items such as connecting terminals KVIAC and distribution blocks, is based on the cost-effective and space-saving installation in many distribution boards and is always ready to use at any time.
- +1 Like
- Add to Favorites
Recommend
- Amphenol-GIS Offered Busbars for Arc Fault Detection Devices (AFDD)
- Simple and Compact Solar Busbars of FTG (Sub-brand of Amphenol-GIS)
- Amphenol-GIS KA42 Connection Terminal Now Available with Protection Class IP44
- Amphenol-GIS Distribution Block PDB Solar Serves as a Transfer Point between Solar Panels and Switches in Solar Applications
- Amphenol-GIS Busbars for SPD Type 2 to Meet a Fast and Pre-assembled Wiring
- Amphenol-GIS Anounced the STI Isolated Stud Terminals Allowing Rated Currents of up to 415A and an Operating Voltage of up to 1KV
- High Currents and a Secure Connection When there is Only a Little Space, Amphenol-GIS’s Fully Encapsulated Busbars are the Best Choice
- Cooperation on Wireless Charging Solutions: LAPIS Technology and Shanghai Amphenol Airwave join forces Providing one-stop support for implementing wireless charging functions
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.