IMS. LLS Series Infrared Photoelectric Liquid Level Switch Suitable for Transparent or Non-Transparent Liquids Measurement

2023-06-22 Intellisense Microelectronics News
infrared photoelectric liquid level switch,liquid level switch,sensor,IMS. LLS

IMS. LLS series infrared photoelectric liquid level switch is a new type of liquid level switch based on the infrared photoelectric principle. This series of sensors have no mechanical moving parts inside and can be sealed with glue once, which can work stably and reliably for a long time. When used, the sensor can be installed horizontally or at the bottom and fixed directly on the wall of the liquid container. The product has only one sensor, and users can determine the location of measuring points according to their needs. This product is suitable for measuring the liquid level in water tanks, oil tanks, and pressure vessels. All kinds of transparent or non-transparent liquids can be used.


This product is directly installed on the side wall of the container for use. First, the user processes a corresponding thread on the side wall of the container, such as M12, 3/8 '' NPT, G1/2, etc., and then screws the level switch onto the side wall of the container.


During installation, pay attention to installing a sealing rubber gasket between the container and the sensor for sealing. If it is difficult to process and install threaded holes on site, a matching threaded hole flange can be processed, the flange is welded on the side wall of the container, and then the level switch is screwed into the installation flange.

 


  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: