5V, Differential Input, DirectDrive, 215mW Stereo Headphone Amplifiers with Shutdown

2021-07-30 LowPowerSemi
Earphone Amplifiers,Earphone Amplifiers,LPA4722,LPA4722

LowPowerSemi's LPA4722 stereo headphone amplifiers are designed for portable equipment where board space is at a premium. The LPA4722 delivers up to 215mW per channel into a 16Ω load or 200mW into a 32Ω load and has a low 0.01% THD+N. An 80dB at 217Hz power-supply rejection ratio (PSRR) allows these devices to operate from noisy digital supplies without an additional linear regulator. Comprehensive anti-click-and-pop circuitry suppresses audible clicks and pops on startup and shutdown. A low-power shutdown mode reduces the supply current to 0.1µA. The LPA4722 operates from a single 2.5V to 5.5V supply, consumes only a 5mA supply current, and is specified over the extended -40 ℃ to +85 ℃ temperature range. The devices are available in tiny 16-pin TQFN (3mm ✕  3mm ✕ 0.8mm) packages.


Features

2.5V to 5.5V Single-Supply Operation

High PSRR (80dB at 217Hz) Eliminates LDO

No Bulky DC-Blocking Capacitors Required

Ground-Referenced Outputs Eliminate DC Bias Voltage on Headphone Ground Pin

No Degradation of Low-Frequency Response Due to Output Capacitors

Differential Inputs for Enhanced Noise Cancellation

194mW into 32Ω Load from 5V Power Supply at THD+N = 0.1% (TYP, per Channel)

Low 0.003% THD+N

Short-Circuit and Thermal-Overload Protection

Integrated Click-and-Pop Suppression

Low Quiescent Current (5mA at VDD = 5V)

Shutdown Control

Under-Voltage Lockout Function

-40℃ to +85℃ Operating Temperature Range

Available in a Space-Saving 16-Pin TQFN (3mm ✕  3mm ✕  0.8mm) Package


Applications 

MP3 Players 

Smart/Cellular Phones 

PDAs 

Portable Audio 

Notebook and Desktop PCs 

Flat-Panel Monitors


Order Information



Typical Application Circuit


  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: