LPA4722A 5V, Differential Input, Direct Drive, 215mW Stereo Headphone Amplifiers with Shutdown Preliminary Datasheet
■The LPA4722A stereo headphone amplifiers are designed for portable equipment where board space is at a premium. The LPA4722A deliver up to 215mW per channel into a 16Ω load or 200mW into a 32Ω load and have low 0.005% THD+N. An 80dB at 217Hz power-supply rejection ratio (PSRR) allows these devices to operate from noisy digital supplies without an additional linear regulator. Comprehensive anticlick-and-pop circuitry suppresses audible clicks and pops on startup and shutdown. A low-power shutdown mode reduces the supply current to 0.1μA.
■The LPA4722A operates from a single 2.5V to 5.5V supply, consumes only 5mA supply current, and is specified over the extended -40 °C to +85 °C temperature range. The devices are available in tiny 16-pin TQFN (3mm✕ 3mm✕0.8mm) packages.
●Features
■2.5V to 5.5V Single-Supply Operation
■High PSRR (80dB at 217Hz) Eliminates LDO
■No Bulky DC-Blocking Capacitors Required
■Ground-Referenced Outputs Eliminate DC Bias Voltage on Headphone Ground Pin
■No Degradation of Low-Frequency Response Due to Output Capacitors
■Differential Inputs for Enhanced Noise Cancellation
■194mW into 32Ω Load from 5V Power Supply at THD+N = 0.1% (TYP, per Channel)
■Low 0.008% THD+N
■Short-Circuit and Thermal-Overload Protection
■Integrated Click-and-Pop Suppression
■Low Quiescent Current (3mA at VDD = 5V)
■Shutdown Control
■Under-Voltage Lockout Function
■-40°C to +85°C Operating Temperature Range
■Available in a Space-Saving 16-Pin TQFN (3mm ✕ 3mm✕ 0.8mm) Package
stereo headphone amplifiers 、 Differential Input Direct Drive 215mW Stereo Headphone Amplifiers |
|
[ MP3 Players ][ Smart Cellular Phones ][ PDAs ][ Portable Audio ][ Notebook ][ Desktop PCs ][ Flat-Panel Monitors ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
TQFN-16;TQFN |
|
English Chinese Chinese and English Japanese |
|
May.-2023 |
|
|
|
|
|
988 KB |
- +1 Like
- Add to Favorites
Recommend
- 5V, Differential Input, DirectDrive, 215mW Stereo Headphone Amplifiers with Shutdown
- 2.7A Synchronous Boost DC-DC Convertor Features Up to 95% Efficiency
- Constant-current/constant-voltage Linear Charger for Single Cell Lithiumion Batteries Suitable for Portable Applications
- 140mW Headphone Amplifier with Unity-gain Stable
- 1A Dual Channel Charge Pump Power Solution For TFT LCD Panel
- Enhancement Power MOSFET Integrating Two P-channel Enhancement Mosfet Transistor
- ROHM Introduces New BD77502FVM 2-Channel High-Speed Ground Sense CMOS Op Amp
- ROHM‘s New Zero-Drift Op Amp with High Accuracy Regardless of Temperature Changes, Offering 9µV Input Offset Voltage
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.