CrimpFlex™ Jumper Cables Allow a Better Retention Compared to FFCs Used with ZIF/LIF Connectors
Our CrimpFlex™ jumper cables are dedicated to connections from board to board in 2 market standard pitches, 1.27mm and 2.54mm. The FFC cables manufactured by Nicomatic are used for the jumpers are made of two flat copper conductors laminated between two layers of polyester/adhesive insulation.
The flat cables used for Nicomatic flexible jumpers equipped with Crimpflex connectors are made of flat copper conductors on both sides adhesive bonded to aluminum foils.
Our jumpers allow better retention compared to FFCs used with ZIF/LIF connectors thanks to a large choice of contacts and housings designed for each use. The best contact resistance together with a high mechanical force is a guarantee for higher reliability and a longer lifetime of the end product.
General features:
(1) UL VW-1 inflammability + UL E235596, 232192, 203388 certificates
(2) -20% to -30% lighter vs. bulky discrete wires type AWG26
(3) Temperature range -55°C to +105°C (polyester cable)
(4) Up to 50 contacts crimped at a time with our presses
(5) 90° bending, crimping on the opposite side to left
(6) Numerous functions of connection: cale extension, locking, etc.
(7) Options: shielded cable, polyimide material…
Is It Possible To Connect A Flatcable With A AWG Cable?
Yes. NICOMATIC provides an interconnect solution that allows associating the two systems:
- 2SLxx (female housing)
- 1SMxx (male housing)
- 12472 (female contacts)
- 12471 (male contacts)
- +1 Like
- Add to Favorites
Recommend
- Crimpflex™ Housings Compatible with Most of Existing Market Standards (0.635mm)
- Crimpflex™ Contacts with Excellent Mechanical Retention and Electrical Contact
- PCB Connectors Fully Compatible with Crimpflex™ Interconnection System
- Interconnect Solution from Discrete Wire to Flat Cable Fully compatible with CrimpFlex™
- Nicomatic, a suppiler of connection solutions in extreme environments, has passed Aerospace EN9100: 2016 certification
- The Fastest Crimping Presses on the Market Features up to 50 Contacts in One Stroke
- SMD LEDS, An Ideal Choice for Membrane Switches
- FFC Cables with Thermic Adhesive Increasing Life Expectancy
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
