Crimpflex™ Housings Compatible with Most of Existing Market Standards (0.635mm)
Our Crimpflex™ housings are made of thermoplastic filled with fiberglass classified UL94V-0. They are separated into two product ranges in 1.27mm & 2.54mm pitch and are dedicated to a use with Nicomatic contacts.
They are also compatible with our headers and most of the existing market standards (0.635mm).
General features:
(1) UL E 125469
(2) Application scope: PCB connection, on discrete wire or flat cable, and extension cable
(3) Single and double row (2-50 in 2.54mm and 4-100 in 1.27mm)
(4) Locking (OJ, OL, OM, 1L, MOJ, MOJR, M4J) or detent style (OD)
(5) No polarization or locking (OF, 4F, 7F10, MOF, M4F)
(6) High-density package in 90° (7F10)
(7) Connection to male walled headers (2E, 4E)
(8) Extension housings (OP, 1P)
(9) Option thru-holes to place the latch on the desired side of the FFC
- +1 Like
- Add to Favorites
Recommend
- CrimpFlex™ Jumper Cables Allow a Better Retention Compared to FFCs Used with ZIF/LIF Connectors
- Crimpflex™ Contacts with Excellent Mechanical Retention and Electrical Contact
- PCB Connectors Fully Compatible with Crimpflex™ Interconnection System
- Interconnect Solution from Discrete Wire to Flat Cable Fully compatible with CrimpFlex™
- Nicomatic, a suppiler of connection solutions in extreme environments, has passed Aerospace EN9100: 2016 certification
- The Fastest Crimping Presses on the Market Features up to 50 Contacts in One Stroke
- SMD LEDS, An Ideal Choice for Membrane Switches
- FFC Cables with Thermic Adhesive Increasing Life Expectancy
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.