SIGMA Firmware Upgrade Using FlashTool Users Manual
The firmware (system software) of the SELCO SIGMA modules can be upgraded using a standard PC. The PC must be equipped with at least one RS232 port (COM port).
You will first need to establish the RS232 link between the PC COM port and the SIGMA module.
1.Boot the PC into Windows. Please make sure that the RS232 cable is not attached to the SIGMA module during start-up of the PC.
2.Attach the RS232 cable (delivered with the module) between the RS232 plug of the SIGMA module and the chosen serial port on the PC (e.g. COM1 or COM2).
3.Connect at least the primary supply of the SIGMA module to a 24 V DC supply. Switch on the supply (please make sure that the supply can provide at least 1 A of current).
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2018/07/12 |
|
|
Revision: 02.02.2007 |
|
|
|
|
|
938 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
