DC-1MBd GreenLink OptoLock ® FB01MKIG
an ideal solution for applications like Smartmetering.
The transmitter is based on a highly
reliable gallium indium nitride LED. The receiver is
based on a fully integrated differential photo-diode
with TIA and limiting amplifier.They are housed in
Firecomms patented OptoLock® for fast simple
termination of Plastic Optic Fiber (POF);
The transmitter can be driven from 5V TTL type
logic drivers and the receiver is a single-ended
TTL/CMOS 5V type output. Both transmitter and
receiver operate over the industrial temperature
range of -40 ⁰C to +85 ⁰C;
The transmitter utilizes a green, 530 nm, eye-safe
highly-efficient gallium nitride LED and operates
over a wide range of drive current that can be
adjusted using a serial resistor to minimize current
consumption for known application distances;
The receiver has dual photo-diodes which act as a
differential light sensor giving enhanced immunity to EMI
and EMC from the local environment making the unit ideal
for use in electrically noisy applications. The receiver has a
single data output compatible with TTL/CMOS electronics.
The transmitter and receiver are typically used at 9600
Baud in RS232 or RS485 protocols but support up to 1 MBd
over POF in industrial serial bus protocol links;
OptoLock® is protected by U.S. patents 7,597,485 and
7,905,665, Chinese patents 101501545 A and
102135650 B
[ Smart-Metering ][ Motor Control ][ Voltage Isolation ][ Drives ][ Inverters ][ Industrial Control ][ Gaming ][ Battery Monitoring ] |
|
Datasheet |
|
EMC 、 EMI 、 ESD(HBM,Mil-STD-883) 、 ESD(HBM,Level 2 (4 kV)) 、 Eye Safety(IEC 60825‐1) 、 Eye Safety(LED Class 1) 、 J-STD-020D 、 RoHS 、 UL 94 V-0 |
|
Please see the document for details |
|
Industrial |
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
|
Revision P2 |
|
|
|
1.1 MB |
- +1 Like
- Add to Favorites
Recommend
- Firecomms Signed a Distributor Agreement with Sekorm
- Firecomms Partner with Litho Circuits for the Development of Their Own Component Libraries in Order to Improve Customer Experience
- Firecomms Fiber Optics for Renewable Energy Applications
- Firecomms Present Their Latest Technology and Products for Data Links over Plastic Optic Fiber (POF)
- Firecomms Present the Latest SMI Transceivers, A Smart Solution for EMI/EMC Isolation between Cabinets, Boxes, or Control Cards
- Firecomms Fiber Optics for Smart Grid Automation Applications
- Firecomms Fiber Optics for Power System Management Applications
- Wide-bandgap Power Converters with Easy-to-use Inverter Development Modules
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.